PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FINY-093BK
FINY-093BK ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN, material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL, overall_width: 0.135 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN, special_features: COLOR BLACK, style_designator: SINGLE LOOP, tongue_hole_type: ROUND, UNTHREADED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-529-6510, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FINY-093BK
NSN: 5340-00-529-6510
FSC: 5340
CAGE: 85480 — BRADY UNITED STATES (USA)
SPECIFICATIONS
diameter0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
overall_width0.135 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
special_featuresCOLOR BLACK
style_designatorSINGLE LOOP
tongue_hole_typeROUND, UNTHREADED
material_thickness0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
loop_inside_diameter0.094 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end0.327 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole0.171 INCHES MINIMUM AND 0.233 INCHES MAXIMUM IN
NSN5340-00-529-6510
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FINY-093BK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE LOOP
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 0.327 INCHES NOMINAL IN
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
•
DIAMETER: 0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
TONGUE HOLE TYPE: ROUND, UNTHREADED
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE LOOP
DISTANCE FROM LOOP CENTER TO TONGUE END0.327 INCHES NOMINAL IN
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
DIAMETER0.091 INCHES MINIMUM AND 0.101 INCHES MAXIMUM IN
MATERIAL THICKNESS0.020 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
TONGUE HOLE TYPEROUND, UNTHREADED
OVERALL WIDTH0.135 INCHES MINIMUM AND 0.185 INCHES MAXIMUM IN
SPECIAL FEATURESCOLOR BLACK
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE0.171 INCHES MINIMUM AND 0.233 INCHES MAXIMUM IN
LOOP INSIDE DIAMETER0.094 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
989115-14BInterchangeable
interchangeable cross-reference
interchangeable
17690Interchangeable
interchangeable cross-reference
interchangeable
BP2643-14Interchangeable
interchangeable cross-reference
interchangeable
101402Interchangeable
interchangeable cross-reference
interchangeable
10861889Interchangeable
interchangeable cross-reference
interchangeable
HL-1812Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FINY-093BK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FINY-093BK?
FINY-093BK is a CLAMP,LOOP.
What parts can replace FINY-093BK?
There are 18 known substitutes for FINY-093BK: 989115-14B, 17690, BP2643-14 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FINY-093BK?
FINY-093BK is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-529-6510. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FINY-093BK

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026