PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FIG22STYLEA
FIG22STYLEA ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The SLEEVE,CLINCH,TUBE FITTING is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING, overall_length: 0.475 INCHES NOMINAL IN, style_designator: FLARELESS, seat_angle_in_deg: 40.000, surface_treatment: PASSIVATE, casehardening_indicator: NOT CASEHARDENED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-800-3121, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FIG22STYLEA
NSN: 4730-00-800-3121
FSC: 4730
CAGE: 81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL CORROSION RESISTING
overall_length0.475 INCHES NOMINAL IN
style_designatorFLARELESS
seat_angle_in_deg40.000
surface_treatmentPASSIVATE
casehardening_indicatorNOT CASEHARDENED
flange_outside_diameter1.446 INCHES NOMINAL IN
sleeve_outside_diameter1.341 INCHES NOMINAL IN
metallic_hardness_rating70.0 MINIMUM ROCKWELL B AND 95.0 MAXIMUM ROCKWELL B
nondefinitive_spec/std_data22 FIGURE AND A STYLE
hose/tube_outside_diameter_for_which_designed1.250 INCHES NOMINAL IN
NSN4730-00-800-3121
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: FIG22STYLEA · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASEHARDENING INDICATOR: NOT CASEHARDENED
•
FLANGE OUTSIDE DIAMETER: 1.446 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 22 FIGURE AND A STYLE
•
STYLE DESIGNATOR: FLARELESS
•
SURFACE TREATMENT: PASSIVATE
•
MATERIAL: STEEL CORROSION RESISTING
•
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 1.250 INCHES NOMINAL IN
•
METALLIC HARDNESS RATING: 70.0 MINIMUM ROCKWELL B AND 95.0 MAXIMUM ROCKWELL B
TECHNICAL CHARACTERISTICS (FLIS)
CASEHARDENING INDICATORNOT CASEHARDENED
FLANGE OUTSIDE DIAMETER1.446 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA22 FIGURE AND A STYLE
STYLE DESIGNATORFLARELESS
SURFACE TREATMENTPASSIVATE
MATERIALSTEEL CORROSION RESISTING
HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED1.250 INCHES NOMINAL IN
METALLIC HARDNESS RATING70.0 MINIMUM ROCKWELL B AND 95.0 MAXIMUM ROCKWELL B
SLEEVE OUTSIDE DIAMETER1.341 INCHES NOMINAL IN
OVERALL LENGTH0.475 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
10386313Interchangeable
interchangeable cross-reference
interchangeable
4730004667467Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-18866Interchangeable
interchangeable cross-reference
interchangeable
MIL-F-21467Interchangeable
interchangeable cross-reference
interchangeable
6-6 080220CA-PHInterchangeable
interchangeable cross-reference
interchangeable
16700093NInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FIG22STYLEA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FIG22STYLEA?
FIG22STYLEA is a SLEEVE,CLINCH,TUBE FITTING.
What parts can replace FIG22STYLEA?
There are 21 known substitutes for FIG22STYLEA: 10386313, 4730004667467, MIL-F-18866 and 18 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FIG22STYLEA?
FIG22STYLEA is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-800-3121. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FIG22STYLEA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026