PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FIG 1430 SZ 10 IN
FIG 1430 SZ 10 IN ✓ Verified by PartsTable
— · GATE VALVE
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

CAPACITOR,FIXED,GLASS DIELECTRIC. Key specifications include material: COPPER ALLOY STEM, stem_type: RISING, valve_size: 10.000 INCHES IN, bonnet_type: OUTSIDE SCREW-YOKE, connection_type: FLANGE, ROUND W/HOLES, flange_diameter: 16.000 INCHES IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-883-4596, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FIG 1430 SZ 10 IN
NSN: 4820-00-883-4596
FSC: 4820
CAGE: 37239 — LUNKENHEIMER CO (USA)
SPECIFICATIONS
materialCOPPER ALLOY STEM
stem_typeRISING
valve_size10.000 INCHES IN
bonnet_typeOUTSIDE SCREW-YOKE
connection_typeFLANGE, ROUND W/HOLES
flange_diameter16.000 INCHES IN
features_providedBONNET PACKING
bolt_hole_quantity12
flange_face_designPLAIN
face_to_face_distance13.000 INCHES IN
valve_operation_methodMANUAL
bonnet_attachment_methodBOLTED
NSN4820-00-883-4596
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: FIG 1430 SZ 10 IN · OEM ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY DISK
•
BOLT HOLE QUANTITY: 12
•
BONNET TYPE: OUTSIDE SCREW-YOKE
•
FACE TO FACE DISTANCE: 13.000 INCHES IN
•
FLANGE DIAMETER: 16.000 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 CLASS AND 10 SIZE
•
OPERATING PRESSURE AND TYPE: 125.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED AND 200.0 POUNDS PER SQUARE INCH (PSI) WATER AND OTHER LIQUIDS MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY DISK
MATERIALIRON CAST UNS F12102 BODY
BOLT HOLE QUANTITY12
BONNET TYPEOUTSIDE SCREW-YOKE
FACE TO FACE DISTANCE13.000 INCHES IN
FLANGE DIAMETER16.000 INCHES IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 CLASS AND 10 SIZE
OPERATING PRESSURE AND TYPE125.0 POUNDS PER SQUARE INCH (PSI) STEAM MAXIMUM REQUIRED AND 200.0 POUNDS PER SQUARE INCH (PSI) WATER AND OTHER LIQUIDS MAXIMUM REQUIRED LOCATION NOT OTHERWISE SPECIFIED LBS
FLANGE FACE DESIGNPLAIN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A126 ASSN STD SINGLE MATERIAL RESPONSE BODY
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
MSS SP-70Interchangeable
interchangeable cross-reference
interchangeable
0611FLG3Interchangeable
interchangeable cross-reference
interchangeable
WWV58Interchangeable
interchangeable cross-reference
interchangeable
1138Interchangeable
interchangeable cross-reference
interchangeable
326Interchangeable
interchangeable cross-reference
interchangeable
1787 SZ 4 INInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FIG 1430 SZ 10 IN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FIG 1430 SZ 10 IN?
FIG 1430 SZ 10 IN is a CAPACITOR,FIXED,GLASS DIELECTRIC.
What parts can replace FIG 1430 SZ 10 IN?
There are 19 known substitutes for FIG 1430 SZ 10 IN: MSS SP-70, 0611FLG3, WWV58 and 16 more. Substitute compatibility should be verified for your specific system.
Is FIG 1430 SZ 10 IN still available?
FIG 1430 SZ 10 IN is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FIG 1430 SZ 10 IN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026