PartsTable
Technical Data Sheet
Download PDF

FHS-116-20 — PIN,STRAIGHT,HEADED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FHS-116-20: PIN,STRAIGHT,HEADED.

The PIN,STRAIGHT,HEADED is a the manufacturer industrial component. Key specifications include height: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN, diameter: 0.114 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN, material: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL, pin_head_diameter: 0.187 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, surface_treatment: PASSIVATE OVERALL, under_head_length: 0.545 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-382-4516, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FHS-116-20
NSN: 5315-01-382-4516
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 46384 — PENN ENGINEERING & MANUFACTURING CORP (USA)
SPECIFICATIONS
height0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
diameter0.114 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
materialSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
pin_head_diameter0.187 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
under_head_length0.545 INCHES NOMINAL IN
NSN5315-01-382-4516
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FHS-116-20 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
UNDER HEAD LENGTH: 0.545 INCHES NOMINAL IN
•
PIN HEAD DIAMETER: 0.187 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
•
DIAMETER: 0.114 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
•
HEIGHT: 0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
TECHNICAL CHARACTERISTICS
UNDER HEAD LENGTH0.545 INCHES NOMINAL IN
PIN HEAD DIAMETER0.187 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
DIAMETER0.114 INCHES MINIMUM AND 0.118 INCHES MAXIMUM IN
HEIGHT0.080 INCHES MINIMUM AND 0.090 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OVERALL
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES 1
3507-0006Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FHS-116-20?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FHS-116-20?
FHS-116-20 is a PIN,STRAIGHT,HEADED.
What parts can replace FHS-116-20?
There is 1 known substitute for FHS-116-20: 3507-0006. Substitute compatibility should be verified for your specific system.
What is the NSN for FHS-116-20?
FHS-116-20 is cataloged in the U.S. Government catalog under NSN 5315-01-382-4516. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FHS-116-20

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.