The FUSEHOLDER,EXTRACTOR POST is a the manufacturer industrial component. Key specifications include body_style: REAR PANEL MOUNTED TYPE, cap_diameter: 0.680 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN, keyway_width: 0.200 INCHES MINIMUM IN, overall_width: 1.068 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN, overall_height: 1.200 INCHES MINIMUM AND 1.205 INCHES MAXIMUM IN, overall_length: 3.750 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System under NSN 5920-00-170-4226, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | PLASTIC POLYHEXAMETHYLENE ADIPAMIDE AND GLASS OR PLASTIC POLYCAPROLACTAM AND GLASS OR PLASTIC POLYHEXAMETHYLENE SEBACAMIDE AND GLASS BODY |
| body_style | REAR PANEL MOUNTED TYPE |
| cap_diameter | 0.680 INCHES MINIMUM AND 0.690 INCHES MAXIMUM IN |
| keyway_width | 0.200 INCHES MINIMUM IN |
| overall_width | 1.068 INCHES MINIMUM AND 1.072 INCHES MAXIMUM IN |
| overall_height | 1.200 INCHES MINIMUM AND 1.205 INCHES MAXIMUM IN |
| overall_length | 3.750 INCHES MINIMUM AND 4.000 INCHES MAXIMUM IN |
| resistor_rating | 120.0 KILOHMS |
| bushing_diameter | 0.500 INCHES NOMINAL IN |
| fragility_factor | MODERATELY RUGGED |
| overall_diameter | 0.688 INCHES NOMINAL IN |
| special_features | ITEM MUST COMPLY W/RQMTS OF DESC PRODUCTION STD NO. L00026 |
| NSN | 5920-00-170-4226 |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL IN |
| VOLTAGE IN VOLTS | 250.0 |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.875 INCHES NOMINAL IN |
| OVERALL HEIGHT | 1.200 INCHES MINIMUM AND 1.205 INCHES MAXIMUM IN |
| SPECIAL FEATURES | ITEM MUST COMPLY W/RQMTS OF DESC PRODUCTION STD NO. L00026 |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL IN |
| RESISTOR RATING | 120.0 KILOHMS |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.750 INCHES NOMINAL IN |
| SCREW THREAD QUANTITY PER INCH | 32.0 |