FHC6C6CP-S01GY: SCREW,MACHINE.
The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.200 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN, fastener_length: 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, special_features: PAINT HEAD,PER FED STD 595,NO. 6307.
This part is cataloged in the U.S. Government catalog under NSN 5305-01-232-1357, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| head_style | FLAT COUNTERSUNK |
| thread_class | 2A A |
| head_diameter | 0.244 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN |
| thread_length | 0.200 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN |
| fastener_length | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| special_features | PAINT HEAD,PER FED STD 595,NO. 6307 |
| thread_direction | RIGHT-HAND |
| countersink_angle | 82.0 DEGREES NOMINAL |
| internal_drive_style | CROSS RECESS TYPE 1 |
| nominal_thread_diameter | 0.138 INCHES IN |
| thread_quantity_per_inch | 32 |
| thread_series_designator | UNIFIED NATIONAL COARSE (UNC) |
| NSN | 5305-01-232-1357 |
| FASTENER LENGTH | 0.345 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN |
| THREAD LENGTH | 0.200 INCHES MINIMUM AND 0.292 INCHES MAXIMUM IN |
| NOMINAL THREAD DIAMETER | 0.138 INCHES IN |
| HEAD STYLE | FLAT COUNTERSUNK |
| THREAD DIRECTION | RIGHT-HAND |
| SCREW MATERIAL | STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 |
| SPECIAL FEATURES | PAINT HEAD,PER FED STD 595,NO. 6307 |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| COUNTERSINK ANGLE | 82.0 DEGREES NOMINAL |
| THREAD CLASS | 2A A |
No substitute or cross-reference records for this part.