PartsTable
Technical Data Sheet
Download PDF

FH8C8D-S01GY — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FH8C8D-S01GY: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.282 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 0.350 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN, screw_material: STEEL, fastener_length: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-017-2561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FH8C8D-S01GY
NSN: 5305-01-017-2561
FSC: 5305 — Screws
CAGE: 12324 — DUPREE INC. DBA STAKE FASTENER (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.282 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.350 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
screw_materialSTEEL
fastener_length0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
special_featuresCOLOR GRAY ENAMEL MIL-E-15090 TYPE 3 CLASS 2
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.164 INCHES IN
screw_surface_treatmentCADMIUM AND PAINT
NSN5305-01-017-2561
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FH8C8D-S01GY · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM AND PAINT
•
FASTENER LENGTH: 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7839 MIL SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.350 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM AND PAINT
FASTENER LENGTH0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7839 MIL SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.350 INCHES MINIMUM AND 0.432 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL
SPECIAL FEATURESCOLOR GRAY ENAMEL MIL-E-15090 TYPE 3 CLASS 2
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
950853-64Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FH8C8D-S01GY?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FH8C8D-S01GY?
FH8C8D-S01GY is a SCREW,MACHINE.
What parts can replace FH8C8D-S01GY?
There is 1 known substitute for FH8C8D-S01GY: 950853-64. Substitute compatibility should be verified for your specific system.
What is the NSN for FH8C8D-S01GY?
FH8C8D-S01GY is cataloged in the U.S. Government catalog under NSN 5305-01-017-2561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FH8C8D-S01GY

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.