The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF, flange_style: ROUND W / BOLT HOLES FIRST END, connection_type: PLAIN FACE FLANGE FIRST END, inside_diameter: 1.120 INCHES NOMINAL IN, connection_style: PLAIN FIRST END, flange_thickness: 0.440 INCHES NOMINAL FIRST END IN. This part is cataloged in the U.S.
Government catalog under NSN 4720-01-122-1009, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
FH104N0220-0180
NSN:4720-01-122-1009 FSC:4720 — Hose and Flexible Tubing CAGE:01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
temp_rating
-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
flange_style
ROUND W / BOLT HOLES FIRST END
connection_type
PLAIN FACE FLANGE FIRST END
inside_diameter
1.120 INCHES NOMINAL IN
connection_style
PLAIN FIRST END
flange_thickness
0.440 INCHES NOMINAL FIRST END IN
outside_diameter
1.500 INCHES NOMINAL IN
special_features
TWO HOSE ASSEMBLIES CONNECTED BY A 90.0 DEG ELBOW; 1ST LEG LG 22.000 IN.,2ND LEG LG 18.000 IN
bolt_hole_diameter
0.560 INCHES NOMINAL FIRST END IN
bolt_hole_quantity
4 FIRST END
operating_pressure
625.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
2500.0 POUNDS PER SQUARE INCH LBS
NSN
4720-01-122-1009
COMPONENT DIAGRAM
KEY FEATURES
•
MEASURING METHOD AND LENGTH: 40.000 INCHES NOMINAL OVERALL IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
FLANGE THICKNESS: 0.440 INCHES NOMINAL FIRST END IN
•
MINIMUM INSIDE BENDING RADIUS: 9.000 INCHES IN
•
CONNECTION STYLE: PLAIN FIRST END
•
FLANGE OUTSIDE DIAMETER: 3.810 INCHES NOMINAL FIRST END IN
•
END CONNECTION DESIGN: STRAIGHT FIRST END
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
TECHNICAL CHARACTERISTICS
MEASURING METHOD AND LENGTH
40.000 INCHES NOMINAL OVERALL IN
TEMP RATING
-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE DEGF
FLANGE THICKNESS
0.440 INCHES NOMINAL FIRST END IN
MINIMUM INSIDE BENDING RADIUS
9.000 INCHES IN
CONNECTION STYLE
PLAIN FIRST END
FLANGE OUTSIDE DIAMETER
3.810 INCHES NOMINAL FIRST END IN
END CONNECTION DESIGN
STRAIGHT FIRST END
LAYER COMPOSITION AND LOCATION
1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
CONNECTION TYPE
PLAIN FACE FLANGE FIRST END
BOLT HOLE DIAMETER
0.560 INCHES NOMINAL FIRST END IN
OTHER ITEMS IN FSC 4720 — Hose and Flexible Tubing
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FH104N0220-0180?
FH104N0220-0180 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace FH104N0220-0180?
There is 1 known substitute for FH104N0220-0180: 67-195119 3-4L1-22 L2-18. Substitute compatibility should be verified for your specific system.
What is the NSN for FH104N0220-0180?
FH104N0220-0180 is cataloged in the U.S. Government catalog under NSN 4720-01-122-1009. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.