FGD6010L10-M-2 — NUT,SELF-LOCKING,SPLINE

✓ Government record, cited

— · NUT WASHER

PRODUCT OVERVIEW

FGD6010L10-M-2: NUT,SELF-LOCKING,SPLINE.

The NUT,SELF-LOCKING,SPLINE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 OR STEEL COMP 305 SHELL, nut_style: SPLINE (FLOATING), nut_height: 0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN, nut_length: 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, pilot_length: 0.440 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-522-4091, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FGD6010L10-M-2

NSN: 5310-01-522-4091
FSC: 5310 — Nuts and Washers
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)

SPECIFICATIONS

material	STEEL COMP 304 OR STEEL COMP 305 SHELL
nut_style	SPLINE (FLOATING)
nut_height	0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
nut_length	0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
lubrication	DRY FILM LUBRICANT
pilot_length	0.440 INCHES NOMINAL IN
thread_class	3B
thread_series	UNIFIED NATIONAL JOINT FINE (UNJF)
pilot_diameter	0.264 INCHES MINIMUM AND 0.270 INCHES MAXIMUM IN
hardness_rating	40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
locking_feature	PREVAILING TORQUE ALL METAL DESIGN
special_features	HARDNESS RATING APPLIES TO THE BRACKET ONLY, THE NUT HAS A 160 KSI MIN TENSILE STRENGTH
NSN	5310-01-522-4091

COMPONENT DIAGRAM

KEY FEATURES

•

LUBRICATION: DRY FILM LUBRICANT

•

WIDTH ACROSS FLATS: 0.390 INCHES NOMINAL IN

•

NUT LENGTH: 0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT

•

THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)

•

HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM

TECHNICAL CHARACTERISTICS

LUBRICATION	DRY FILM LUBRICANT
WIDTH ACROSS FLATS	0.390 INCHES NOMINAL IN
NUT LENGTH	0.547 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE AND QQ-P-416, TYPE II, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE SHELL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416, TYPE 11, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE BRACKET
THREAD SERIES	UNIFIED NATIONAL JOINT FINE (UNJF)
HARDNESS RATING	40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5085 ASSN STD SINGLE MATERIAL RESPONSE BRACKET
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-23195 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 5639 ASSN STD 2ND MATERIAL RESPONSE OR AMS 5514 ASSN STD 2ND MATERIAL RESPONSE SHELL

OTHER ITEMS IN FSC 5310 — Nuts and Washers

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540

SUBSTITUTES & CROSS-REFERENCES 1

C7592A3M2Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy FGD6010L10-M-2?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FGD6010L10-M-2?

FGD6010L10-M-2 is a NUT,SELF-LOCKING,SPLINE.

What parts can replace FGD6010L10-M-2?

There is 1 known substitute for FGD6010L10-M-2: C7592A3M2. Substitute compatibility should be verified for your specific system.

What is the NSN for FGD6010L10-M-2?

FGD6010L10-M-2 is cataloged in the U.S. Government catalog under NSN 5310-01-522-4091. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FGD6010L10-M-2 — NUT,SELF-LOCKING,SPLINE

Request a Quote — FGD6010L10-M-2