PartsTable
Technical Data Sheet
Download PDF

FGD6010L10-C-3 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FGD6010L10-C-3: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL COMP 304 SHELL, nut_height: 0.521 INCHES NOMINAL IN, nut_length: 0.572 INCHES NOMINAL IN, lubrication: DRY FILM LUBRICANT, pilot_length: 0.161 INCHES NOMINAL IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-053-9995, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FGD6010L10-C-3
NSN: 5310-01-053-9995
FSC: 5310 — Nuts and Washers
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialSTEEL COMP 304 SHELL
nut_height0.521 INCHES NOMINAL IN
nut_length0.572 INCHES NOMINAL IN
lubricationDRY FILM LUBRICANT
pilot_length0.161 INCHES NOMINAL IN
thread_class3B
thread_seriesUNF
pilot_diameter0.298 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
features_providedFLOATING NUT
surface_treatmentCADMIUM AND CHROMATE OVERALL
NSN5310-01-053-9995
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FGD6010L10-C-3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 0.390 INCHES NOMINAL IN
•
NUT LENGTH: 0.572 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNF
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5085 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6855 MIL SPEC 2ND MATERIAL RESPONSE NUT
•
FEATURES PROVIDED: FLOATING NUT
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS0.390 INCHES NOMINAL IN
NUT LENGTH0.572 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNF
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5085 ASSN STD 1ST MATERIAL RESPONSE OR MIL-S-18729 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-S-6855 MIL SPEC 2ND MATERIAL RESPONSE NUT
FEATURES PROVIDEDFLOATING NUT
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.190 INCHES IN
PILOT DIAMETER0.298 INCHES MINIMUM AND 0.302 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 4
5310PL0743427Reference document
Same NSN cross-reference
Reference document — Informative reference only
SL3469-3C3Reference document
Same NSN cross-reference
Reference document — Secondary reference
C7592A3C3Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
FGD6010-10-C-3Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FGD6010L10-C-3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FGD6010L10-C-3?
FGD6010L10-C-3 is a NUT,SELF-LOCKING,CLINCH.
What parts can replace FGD6010L10-C-3?
There are 4 known substitutes for FGD6010L10-C-3: 5310PL0743427, SL3469-3C3, C7592A3C3 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FGD6010L10-C-3?
FGD6010L10-C-3 is cataloged in the U.S. Government catalog under NSN 5310-01-053-9995. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FGD6010L10-C-3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.