PartsTable
Technical Data Sheet
Download PDF

FG26010P2 — SEAL,MAGNETIC

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FG26010P2: SEAL,MAGNETIC.

The SEAL,MAGNETIC is a the manufacturer industrial component. Key specifications include overall_height: 0.560 INCHES NOMINAL IN, overall_diameter: 2.621 INCHES MINIMUM AND 2.622 INCHES MAXIMUM IN, special_features: SEAL BORE SHALL OPERATE ON SHAFT DIAMETER 1.599-1.560, end_item_identification: F/A-18 C/D AIRCRAFT, part_name_assigned_by_controlling_agency: SEAL, PLAIN ENCASED. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-516-2903, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FG26010P2
NSN: 5330-01-516-2903
FSC: 5330 — Packing and Gasket Materials
CAGE: 07639 — GE AVIATION SYSTEMS LLC DBA GE AVIATION SYSTEMS LLC (USA)
SPECIFICATIONS
overall_height0.560 INCHES NOMINAL IN
overall_diameter2.621 INCHES MINIMUM AND 2.622 INCHES MAXIMUM IN
special_featuresSEAL BORE SHALL OPERATE ON SHAFT DIAMETER 1.599-1.560
end_item_identificationF/A-18 C/D AIRCRAFT
part_name_assigned_by_controlling_agencySEAL, PLAIN ENCASED
NSN5330-01-516-2903
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FG26010P2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 2.621 INCHES MINIMUM AND 2.622 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.560 INCHES NOMINAL IN
OVERALL DIAMETER2.621 INCHES MINIMUM AND 2.622 INCHES MAXIMUM IN
SPECIAL FEATURESSEAL BORE SHALL OPERATE ON SHAFT DIAMETER 1.599-1.560
PART NAME ASSIGNED BY CONTROLLING AGENCYSEAL, PLAIN ENCASED
END ITEM IDENTIFICATIONF/A-18 C/D AIRCRAFT
SUBSTITUTES & CROSS-REFERENCES 1
10138346Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FG26010P2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FG26010P2?
FG26010P2 is a SEAL,MAGNETIC.
What parts can replace FG26010P2?
There is 1 known substitute for FG26010P2: 10138346. Substitute compatibility should be verified for your specific system.
What is the NSN for FG26010P2?
FG26010P2 is cataloged in the U.S. Government catalog under NSN 5330-01-516-2903. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FG26010P2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.