PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FG1556HGG0780
FG1556HGG0780 ✓ Verified by PartsTable
— · PIPE SECTION
WHAT YOU NEED TO KNOW
Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW

The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 37.0 DEGREES FIRST END, temp_rating: -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF, thread_class: 3B SECOND END, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.380 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-207-1073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FG1556HGG0780
NSN: 4720-01-207-1073
FSC: 4720
CAGE: 01276 — DANFOSS POWER SOLUTIONS II, LLC (USA)
SPECIFICATIONS
flow_angle90.0 DEGREES SECOND END
seat_angle37.0 DEGREES FIRST END
temp_rating-40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE DEGF
thread_class3B SECOND END
connection_typeTHREADED INTERNAL TUBE SECOND END
inside_diameter0.380 INCHES NOMINAL IN
connection_styleSWIVEL NUT FLARE FIRST END
outside_diameter0.840 INCHES NOMINAL IN
thread_directionRIGHT-HAND SECOND END
operating_pressure5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure16000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size0.750 INCHES FIRST END IN
NSN4720-01-207-1073
COMPONENT DIAGRAM
PIPE SECTION — SCHEDULE = WALL THICKNESS WALL: — OD: — LENGTH: — — — PN: FG1556HGG0780 · OEM ⚠ VERIFY BEFORE ORDERING Schedule = wall thickness, NOT pipe diameter. Sch 40 and Sch 80 have the same OD but different wall thickness. Nominal pipe size ≠ actual OD — a 1" pipe is actually 1.315" OD ✓ BROKER TIP Sch 40 = standard wall, Sch 80 = heavy wall (higher pressure), Sch 160 = extra heavy. Seamless pipe is required for high-pressure applications — welded pipe has lower ratings PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONNECTION STYLE: SWIVEL NUT FLARE SECOND END
•
THREAD CLASS: 3B FIRST END
•
THREAD DIRECTION: RIGHT-HAND SECOND END
•
SEAT ANGLE: 37.0 DEGREES FIRST END
•
CONNECTION TYPE: THREADED INTERNAL TUBE SECOND END
•
END CONNECTION DESIGN: ELBOW SECOND END
TECHNICAL CHARACTERISTICS (FLIS)
CONNECTION STYLESWIVEL NUT FLARE SECOND END
CONNECTION STYLESWIVEL NUT FLARE FIRST END
THREAD CLASS3B FIRST END
THREAD CLASS3B SECOND END
THREAD DIRECTIONRIGHT-HAND SECOND END
SEAT ANGLE37.0 DEGREES FIRST END
CONNECTION TYPETHREADED INTERNAL TUBE SECOND END
END CONNECTION DESIGNELBOW SECOND END
MINIMUM INSIDE BENDING RADIUS5.000 INCHES IN
LAYER COMPOSITION AND LOCATION1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
416143-15Interchangeable
interchangeable cross-reference
interchangeable
010079-015Interchangeable
interchangeable cross-reference
interchangeable
40102-304-031Interchangeable
interchangeable cross-reference
interchangeable
2750909Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FG1556HGG0780?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FG1556HGG0780?
FG1556HGG0780 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace FG1556HGG0780?
There are 4 known substitutes for FG1556HGG0780: 416143-15, 010079-015, 40102-304-031 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FG1556HGG0780?
FG1556HGG0780 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-207-1073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FG1556HGG0780

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026