PartsTable
Technical Data Sheet
Download PDF

FFW00100TYPEBDESIGN1CLASS1 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FFW00100TYPEBDESIGN1CLASS1: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_diameter: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, hardness_rating: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM, outside_diameter: 0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN, style_designator: FLAT EXTERNAL TEETH, material_thickness: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-209-2615, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFW00100TYPEBDESIGN1CLASS1
NSN: 5310-00-209-2615
FSC: 5310 — Nuts and Washers
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
hardness_rating40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
outside_diameter0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
style_designatorFLAT EXTERNAL TEETH
material_thickness0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
nondefinitive_spec/std_dataB TYPE AND 1 CLASS AND 1 DESIGN
material_document_and_classificationFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-209-2615
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FFW00100TYPEBDESIGN1CLASS1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: FLAT EXTERNAL TEETH
•
MATERIAL DOCUMENT AND CLASSIFICATION: FED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: B TYPE AND 1 CLASS AND 1 DESIGN
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HARDNESS RATING40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORFLAT EXTERNAL TEETH
MATERIAL DOCUMENT AND CLASSIFICATIONFED STD 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.588 INCHES MINIMUM AND 0.610 INCHES MAXIMUM IN
MATERIAL THICKNESS0.028 INCHES MINIMUM AND 0.034 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAB TYPE AND 1 CLASS AND 1 DESIGN
MATERIALSTEEL OVERALL
HOLE DIAMETER0.320 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 2
G205665-9Reference document
Same NSN cross-reference
Reference document — Secondary reference
1118-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy FFW00100TYPEBDESIGN1CLASS1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFW00100TYPEBDESIGN1CLASS1?
FFW00100TYPEBDESIGN1CLASS1 is a WASHER,LOCK.
What parts can replace FFW00100TYPEBDESIGN1CLASS1?
There are 2 known substitutes for FFW00100TYPEBDESIGN1CLASS1: G205665-9, 1118-00. Substitute compatibility should be verified for your specific system.
What is the NSN for FFW00100TYPEBDESIGN1CLASS1?
FFW00100TYPEBDESIGN1CLASS1 is cataloged in the U.S. Government catalog under NSN 5310-00-209-2615. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFW00100TYPEBDESIGN1CLASS1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.