PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFT791-TY1-FM1-CL4-3/4X6
FFT791-TY1-FM1-CL4-3/4X6 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FFT791-TY1-FM1-CL4-3/4X6 is a the manufacturer industrial component. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-187-8182, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFT791-TY1-FM1-CL4-3/4X6
NSN: 5340-00-187-8182
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
Part NumberFFT791-TY1-FM1-CL4-3/4X6
NSN5340-00-187-8182
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFT791-TY1-FM1-CL4-3/4X6 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
TAKE-UP DISTANCE: 6.000 INCHES NOMINAL IN
•
BODY LENGTH: 8.250 INCHES NOMINAL IN
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 1 FORM AND 4 CLASS
•
LOCKING DEVICE TYPE: NUT
•
NOMINAL THREAD SIZE: 0.750 INCHES BODY IN
•
FURNISHED ITEMS AND QUANTITY: 2 LOCKNUT AND 2 EYEBOLT
•
LENGTH: 14.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OVERALL
TAKE-UP DISTANCE6.000 INCHES NOMINAL IN
BODY LENGTH8.250 INCHES NOMINAL IN
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 1 FORM AND 4 CLASS
LOCKING DEVICE TYPENUT
NOMINAL THREAD SIZE0.750 INCHES BODY IN
FURNISHED ITEMS AND QUANTITY2 LOCKNUT AND 2 EYEBOLT
LENGTH14.000 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC) BODY
EYE WIDTH1.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
ASTM F 1145-5Upgraded Successor
successor cross-reference
successor
FF-T-791Upgraded Successor
successor cross-reference
successor
11157-1-64Upgraded Successor
successor cross-reference
successor
ASTM-F1145-I1B 1/2X9Upgraded Successor
successor cross-reference
successor
S-2510-1/2X9Upgraded Successor
successor cross-reference
successor
MS27954-5Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFT791-TY1-FM1-CL4-3/4X6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFT791-TY1-FM1-CL4-3/4X6?
FFT791-TY1-FM1-CL4-3/4X6 is a FFT791-TY1-FM1-CL4-3/4X6.
What parts can replace FFT791-TY1-FM1-CL4-3/4X6?
There are 18 known substitutes for FFT791-TY1-FM1-CL4-3/4X6: ASTM F 1145-5, FF-T-791, 11157-1-64 and 15 more. Substitute compatibility should be verified for your specific system.
Is FFT791-TY1-FM1-CL4-3/4X6 still available?
FFT791-TY1-FM1-CL4-3/4X6 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFT791-TY1-FM1-CL4-3/4X6

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026