PartsTable
Technical Data Sheet
Download PDF

FFS92TYPEISTYLE8S — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS92TYPEISTYLE8S: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN, head_height: 0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN, thread_length: 0.089 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN, screw_material: STEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-141-4307, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92TYPEISTYLE8S
NSN: 5305-00-141-4307
NIINs: 001414307, 001448416, 002064876, 002065141, 002077484, 002271806, 002854532, 002854554, 002854591, 002854595, 002926763, 002977763, 002977985, 002987795, 002987815, 002987831, 002988560, 002988565, 004075901, 004078533, 004988551, 009908386
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_stylePAN
head_height0.053 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.155 INCHES MINIMUM AND 0.167 INCHES MAXIMUM IN
thread_length0.089 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
screw_materialSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
fastener_length0.094 INCHES MINIMUM AND 0.125 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
screw_surface_treatmentCADMIUM AND CHROMATE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-141-4307
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92TYPEISTYLE8S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.117 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE
•
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.511 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.216 INCHES IN
•
HEAD STYLE: BINDING
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.117 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE
FASTENER LENGTH0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-637 FED SPEC SINGLE MATERIAL RESPONSE OR 66 FED STD SINGLE MATERIAL RESPONSE
THREAD LENGTH0.511 INCHES MINIMUM AND 0.594 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.216 INCHES IN
HEAD STYLEBINDING
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 8S STYLE
SCREW MATERIALSTEEL
SUBSTITUTES & CROSS-REFERENCES 1
FFS92Reference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy FFS92TYPEISTYLE8S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92TYPEISTYLE8S?
FFS92TYPEISTYLE8S is a SCREW,MACHINE.
What parts can replace FFS92TYPEISTYLE8S?
There is 1 known substitute for FFS92TYPEISTYLE8S: FFS92. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92TYPEISTYLE8S?
FFS92TYPEISTYLE8S is cataloged in the U.S. Government catalog under NSN 5305-00-141-4307. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92TYPEISTYLE8S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.