PartsTable
Technical Data Sheet
Download PDF

FFS92TYPE1STYLES — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS92TYPE1STYLES: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: BINDING, head_height: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN, thread_length: 0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, screw_material: STEEL COMP 303. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-054-4361, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92TYPE1STYLES
NSN: 5305-00-054-4361
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleBINDING
head_height0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.223 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
thread_length0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303
fastener_length0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
thread_quantity_per_inch40
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-00-054-4361
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92TYPE1STYLES · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
•
THREAD LENGTH: 0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: BINDING
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL COMP 303
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.056 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE
THREAD LENGTH0.138 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEBINDING
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL COMP 303
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
THREAD CLASS2A A
SUBSTITUTES & CROSS-REFERENCES 1
FFS92TYPE1STYLE8SReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy FFS92TYPE1STYLES?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92TYPE1STYLES?
FFS92TYPE1STYLES is a SCREW,MACHINE.
What parts can replace FFS92TYPE1STYLES?
There is 1 known substitute for FFS92TYPE1STYLES: FFS92TYPE1STYLE8S. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92TYPE1STYLES?
FFS92TYPE1STYLES is cataloged in the U.S. Government catalog under NSN 5305-00-054-4361. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92TYPE1STYLES

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.