PartsTable
Technical Data Sheet
Download PDF

FFS92ANDTYPE3STYLE2C — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS92ANDTYPE3STYLE2C: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN, thread_length: 0.605 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN, screw_material: STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302, fastener_length: 0.657 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-150-9953, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92ANDTYPE3STYLE2C
NSN: 5305-00-150-9953
NIINs: 001509953, 001510096, 001510205, 001510206, 001673932, 001673933, 001673934, 001673936, 001673938, 002863248
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.249 INCHES MINIMUM AND 0.279 INCHES MAXIMUM IN
thread_length0.605 INCHES MINIMUM AND 0.619 INCHES MAXIMUM IN
screw_materialSTEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 430 OR STEEL COMP 302
fastener_length0.657 INCHES MINIMUM AND 0.688 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-150-9953
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92ANDTYPE3STYLE2C · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SCREW SURFACE TREATMENT: CADMIUM
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
•
THREAD LENGTH: 0.146 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.099 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
SCREW MATERIAL: STEEL OR STEEL COMP 1010
TECHNICAL CHARACTERISTICS
SCREW SURFACE TREATMENTCADMIUM
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-631 FED SPEC 2ND MATERIAL RESPONSE OR QQ-S-634 FED SPEC 2ND MATERIAL RESPONSE
THREAD LENGTH0.146 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.099 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
SCREW MATERIALSTEEL OR STEEL COMP 1010
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE II
SUBSTITUTES & CROSS-REFERENCES 1
AN505-3R3Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy FFS92ANDTYPE3STYLE2C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92ANDTYPE3STYLE2C?
FFS92ANDTYPE3STYLE2C is a SCREW,MACHINE.
What parts can replace FFS92ANDTYPE3STYLE2C?
There is 1 known substitute for FFS92ANDTYPE3STYLE2C: AN505-3R3. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92ANDTYPE3STYLE2C?
FFS92ANDTYPE3STYLE2C is cataloged in the U.S. Government catalog under NSN 5305-00-150-9953. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92ANDTYPE3STYLE2C

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.