PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS92ANDTYPE1STYLE2S
FFS92ANDTYPE1STYLE2S ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN, thread_length: 0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN, screw_material: COPPER ALLOY, fastener_length: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-150-9758, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92ANDTYPE1STYLE2S
NSN: 5305-00-150-9758
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.175 INCHES MINIMUM AND 0.199 INCHES MAXIMUM IN
thread_length0.152 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
screw_materialCOPPER ALLOY
fastener_length0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
internal_drive_styleSLOT
nominal_thread_diameter0.099 INCHES IN
screw_surface_treatmentANODIZE
minimum_tensile_strength55000 POUNDS PER SQUARE INCH LBS
NSN5305-00-150-9758
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92ANDTYPE1STYLE2S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
MINIMUM TENSILE STRENGTH: 55000 POUNDS PER SQUARE INCH LBS
•
SCREW MATERIAL: STEEL COMP 1010
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
SCREW SURFACE TREATMENT: CADMIUM
•
HEAD DIAMETER: 0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
FASTENER LENGTH0.625 INCHES NOMINAL IN
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
SCREW MATERIALSTEEL COMP 1010
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SCREW SURFACE TREATMENTCADMIUM
HEAD DIAMETER0.308 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD DIAMETER0.164 INCHES IN
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
FFS92ANDTYPE1STYLE2SInterchangeable
interchangeable cross-reference
interchangeable
AN505-8-5Interchangeable
interchangeable cross-reference
interchangeable
6026-7119-36Interchangeable
interchangeable cross-reference
interchangeable
446-14Interchangeable
interchangeable cross-reference
interchangeable
AN505-6-10Interchangeable
interchangeable cross-reference
interchangeable
AN505-6-7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS92ANDTYPE1STYLE2S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92ANDTYPE1STYLE2S?
FFS92ANDTYPE1STYLE2S is a SCREW,MACHINE.
What parts can replace FFS92ANDTYPE1STYLE2S?
There are 11 known substitutes for FFS92ANDTYPE1STYLE2S: FFS92ANDTYPE1STYLE2S, AN505-8-5, 6026-7119-36 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92ANDTYPE1STYLE2S?
FFS92ANDTYPE1STYLE2S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-150-9758. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92ANDTYPE1STYLE2S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026