PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS92ANDTYPE1ANDSTYLE1S
FFS92ANDTYPE1ANDSTYLE1S ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: ROUND, head_height: 0.061 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.122 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_length: 0.347 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, screw_material: STEEL OR STEEL COMP 1010. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-4066, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92ANDTYPE1ANDSTYLE1S
NSN: 5305-00-144-4066
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleROUND
head_height0.061 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.122 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_length0.347 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
screw_materialSTEEL OR STEEL COMP 1010
fastener_length0.375 INCHES NOMINAL IN
special_featuresTHD AS CLOSE TO HEAD AS PRACTICABLE
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.073 INCHES IN
screw_surface_treatmentCADMIUM
NSN5305-00-144-4066
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92ANDTYPE1ANDSTYLE1S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD STYLE: ROUND
•
THREAD LENGTH: 0.188 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: QQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
•
HEAD HEIGHT: 0.061 INCHES MAXIMUM IN
•
SCREW MATERIAL: COPPER ALLOY
•
FASTENER LENGTH: 0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
•
HEAD DIAMETER: 0.122 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
HEAD STYLEROUND
THREAD LENGTH0.188 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-B-626 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-W-321 FED SPEC SINGLE MATERIAL RESPONSE
HEAD HEIGHT0.061 INCHES MAXIMUM IN
SCREW MATERIALCOPPER ALLOY
FASTENER LENGTH0.156 INCHES MINIMUM AND 0.188 INCHES MAXIMUM IN
HEAD DIAMETER0.122 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.073 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 1
AN520B1-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS92ANDTYPE1ANDSTYLE1S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92ANDTYPE1ANDSTYLE1S?
FFS92ANDTYPE1ANDSTYLE1S is a SCREW,MACHINE.
What parts can replace FFS92ANDTYPE1ANDSTYLE1S?
There is 1 known substitute for FFS92ANDTYPE1ANDSTYLE1S: AN520B1-2. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92ANDTYPE1ANDSTYLE1S?
FFS92ANDTYPE1ANDSTYLE1S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-144-4066. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92ANDTYPE1ANDSTYLE1S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026