PartsTable
Technical Data Sheet

FFS92/TY1/STYL45 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS92/TY1/STYL45: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: FILLISTER, thread_class: 2A A, fastener_length: 1.375 INCHES NOMINAL IN, internal_drive_style: SLOT, nominal_thread_diameter: 0.086 INCHES IN, thread_quantity_per_inch: 56. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-407-0539, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92/TY1/STYL45
NSN: 5305-01-407-0539
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleFILLISTER
thread_class2A A
fastener_length1.375 INCHES NOMINAL IN
internal_drive_styleSLOT
nominal_thread_diameter0.086 INCHES IN
thread_quantity_per_inch56
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5305-01-407-0539
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92/TY1/STYL45 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.375 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.086 INCHES IN
•
HEAD STYLE: FILLISTER
•
INTERNAL DRIVE STYLE: SLOT
•
THREAD CLASS: 2A A
•
THREAD QUANTITY PER INCH: 56
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.375 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.086 INCHES IN
HEAD STYLEFILLISTER
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
THREAD QUANTITY PER INCH56
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
SUBSTITUTES & CROSS-REFERENCES 1
100A906252Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FFS92/TY1/STYL45?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92/TY1/STYL45?
FFS92/TY1/STYL45 is a SCREW,MACHINE.
What parts can replace FFS92/TY1/STYL45?
There is 1 known substitute for FFS92/TY1/STYL45: 100A906252. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92/TY1/STYL45?
FFS92/TY1/STYL45 is cataloged in the U.S. Government catalog under NSN 5305-01-407-0539. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92/TY1/STYL45