PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS85TYPEIISTYLE10P
FFS85TYPEIISTYLE10P ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, hole_type: DRILLED, head_style: HEXAGON, head_height: 0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN, thread_class: 2A A, hole_diameter: 0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-012-2104, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS85TYPEIISTYLE10P
NSN: 5305-00-012-2104
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_typeDRILLED
head_styleHEXAGON
head_height0.378 INCHES MINIMUM AND 0.403 INCHES MAXIMUM IN
thread_class2A A
hole_diameter0.060 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
hole_quantity1
thread_length1.500 INCHES MINIMUM AND 1.688 INCHES MAXIMUM IN
fastener_length1.938 INCHES MINIMUM AND 2.000 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
locking_featurePATCH OR STRIP THREADS
thread_directionRIGHT-HAND
NSN5305-00-012-2104
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS85TYPEIISTYLE10P · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
WIDTH BETWEEN FLATS: 0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 69000 POUNDS PER SQUARE INCH LBS
•
HEAD STYLE: HEXAGON
•
HARDNESS RATING: 100.0 ROCKWELL B MAXIMUM OVERALL
•
MATERIAL: STEEL OVERALL
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD HEIGHT0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
FASTENER LENGTH0.625 INCHES NOMINAL IN
WIDTH BETWEEN FLATS0.551 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH69000 POUNDS PER SQUARE INCH LBS
HEAD STYLEHEXAGON
HARDNESS RATING100.0 ROCKWELL B MAXIMUM OVERALL
MATERIALSTEEL OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OR ZINC AND CHROMATE OVERALL
THREAD LENGTH0.625 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.375 INCHES IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
FF-S-85Interchangeable
interchangeable cross-reference
interchangeable
122104Interchangeable
interchangeable cross-reference
interchangeable
6022232Interchangeable
interchangeable cross-reference
interchangeable
605122LInterchangeable
interchangeable cross-reference
interchangeable
FFS85TYPEIISTYLE10PInterchangeable
interchangeable cross-reference
interchangeable
100-15S6-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS85TYPEIISTYLE10P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS85TYPEIISTYLE10P?
FFS85TYPEIISTYLE10P is a BOLT,MACHINE.
What parts can replace FFS85TYPEIISTYLE10P?
There are 16 known substitutes for FFS85TYPEIISTYLE10P: FF-S-85, 122104, 6022232 and 13 more. Substitute compatibility should be verified for your specific system.
Is FFS85TYPEIISTYLE10P still available?
FFS85TYPEIISTYLE10P is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS85TYPEIISTYLE10P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026