PartsTable
Technical Data Sheet
Download PDF

FFS107TYPEUSTYLE1P — SCREW,DRIVE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS107TYPEUSTYLE1P: SCREW,DRIVE.

The SCREW,DRIVE is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1115 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120 OVERALL, head_style: ROUND, head_height: 0.043 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN, pilot_length: 0.045 INCHES NOMINAL IN, head_diameter: 0.099 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN, pilot_diameter: 0.060 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-010-7837, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS107TYPEUSTYLE1P
NSN: 5305-00-010-7837
NIINs: 000107837, 000109371, 000113256, 000125622, 000128328, 000138117, 000141766, 000142281, 000142862, 000145364, 000145366, 000145367, 000145368, 000145369, 000145373, 000145382, 000145385, 000145393, 000220299, 000220531, 001753230, 002702914, 002712109, 002737485, 002737527, 002851432
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL COMP 1115 OR STEEL COMP 1117 OR STEEL COMP 1118 OR STEEL COMP 1120 OVERALL
head_styleROUND
head_height0.043 INCHES MINIMUM AND 0.053 INCHES MAXIMUM IN
pilot_length0.045 INCHES NOMINAL IN
head_diameter0.099 INCHES MINIMUM AND 0.113 INCHES MAXIMUM IN
pilot_diameter0.060 INCHES MINIMUM AND 0.063 INCHES MAXIMUM IN
fastener_length0.188 INCHES NOMINAL IN
special_featuresPILOT POINT
features_providedCASEHARDENED
surface_treatmentCADMIUM OR ZINC OVERALL
nonmachine_thread_styleDRIVE SCREW (TYPE U)
nondefinitive_spec/std_dataU TYPE
NSN5305-00-010-7837
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS107TYPEUSTYLE1P · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONMACHINE NOMINAL THREAD DIAMETER: 0.138 INCHES IN
•
HEAD HEIGHT: 0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
HEAD STYLE: ROUND
•
PILOT DIAMETER: 0.112 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: U TYPE AND T1P STYLE
•
PILOT LENGTH: 0.062 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
NONMACHINE NOMINAL THREAD DIAMETER0.138 INCHES IN
HEAD HEIGHT0.091 INCHES MINIMUM AND 0.103 INCHES MAXIMUM IN
FASTENER LENGTH0.375 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-633 FED SPEC ALL MATERIAL RESPONSES OVERALL
HEAD STYLEROUND
PILOT DIAMETER0.112 INCHES MINIMUM AND 0.116 INCHES MAXIMUM IN
NONDEFINITIVE SPEC/STD DATAU TYPE AND T1P STYLE
PILOT LENGTH0.062 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
107837Reference document
Same NSN cross-reference
Reference document — Secondary reference
T73-15Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
121826Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FFS107TYPEUSTYLE1P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS107TYPEUSTYLE1P?
FFS107TYPEUSTYLE1P is a SCREW,DRIVE.
What parts can replace FFS107TYPEUSTYLE1P?
There are 3 known substitutes for FFS107TYPEUSTYLE1P: 107837, T73-15, 121826. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS107TYPEUSTYLE1P?
FFS107TYPEUSTYLE1P is cataloged in the U.S. Government catalog under NSN 5305-00-010-7837. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS107TYPEUSTYLE1P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.