PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS107TYPEASTYLES
FFS107TYPEASTYLES ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,TAPPING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 410 OVERALL, head_style: FLAT COUNTERSUNK, head_diameter: 0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, fastener_length: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN, countersink_angle: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM, surface_treatment: PASSIVATE OVERALL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-107-3538, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS107TYPEASTYLES
NSN: 5305-01-107-3538
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL COMP 410 OVERALL
head_styleFLAT COUNTERSUNK
head_diameter0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
fastener_length0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
countersink_angle80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
surface_treatmentPASSIVATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nonmachine_thread_styleGIMLET POINT (TYPE A, AB OR BA)
nondefinitive_spec/std_dataAB TYPE
nonmachine_nominal_thread_diameter0.164 INCHES IN
material_document_and_classification66 FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5305-01-107-3538
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS107TYPEASTYLES · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: FLAT COUNTERSUNK
•
FASTENER LENGTH: 0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
•
NONMACHINE THREAD STYLE: GIMLET POINT (TYPE A, AB OR BA)
•
MATERIAL: STEEL COMP 410 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
COUNTERSINK ANGLE: 80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEFLAT COUNTERSUNK
FASTENER LENGTH0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM IN
NONMACHINE THREAD STYLEGIMLET POINT (TYPE A, AB OR BA)
MATERIALSTEEL COMP 410 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
COUNTERSINK ANGLE80.0 DEGREES MINIMUM AND 82.0 DEGREES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
NONDEFINITIVE SPEC/STD DATAAB TYPE
HEAD DIAMETER0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
42323Interchangeable
interchangeable cross-reference
interchangeable
FFS107Interchangeable
interchangeable cross-reference
interchangeable
MS51862-25Interchangeable
interchangeable cross-reference
interchangeable
MS24615-26Interchangeable
Same NIIN cross-reference
interchangeable
MS51862-25CInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS107TYPEASTYLES?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS107TYPEASTYLES?
FFS107TYPEASTYLES is a SCREW,TAPPING.
What parts can replace FFS107TYPEASTYLES?
There are 5 known substitutes for FFS107TYPEASTYLES: 42323, FFS107, MS51862-25 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS107TYPEASTYLES?
FFS107TYPEASTYLES is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-01-107-3538. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS107TYPEASTYLES

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026