PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFP386BANDTYPEA
FFP386BANDTYPEA ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,COTTER is a the manufacturer industrial component. Key specifications include diameter: 0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, material: COPPER ALLOY 260 OVERALL, point_type: EXTENDED PRONG SQUARE CUT, style_designator: STANDARD, underloop_length: 1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN, surface_treatment: OXIDE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-187-9374, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFP386BANDTYPEA
NSN: 5315-00-187-9374
FSC: 5315
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
diameter0.116 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
materialCOPPER ALLOY 260 OVERALL
point_typeEXTENDED PRONG SQUARE CUT
style_designatorSTANDARD
underloop_length1.375 INCHES MINIMUM AND 1.625 INCHES MAXIMUM IN
surface_treatmentOXIDE OVERALL
nondefinitive_spec/std_dataA TYPE
departure_from_cited_designatorAS MODIFIED BY PKG DATA
material_document_and_classificationQQ-B-613 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationMIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-187-9374
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FFP386BANDTYPEA · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT TYPE: EXTENDED PRONG SQUARE CUT
•
UNDERLOOP LENGTH: 1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
•
DIAMETER: 0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B134 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY PKG DATA
•
STYLE DESIGNATOR: STANDARD
•
SURFACE TREATMENT: OXIDE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
POINT TYPEEXTENDED PRONG SQUARE CUT
UNDERLOOP LENGTH1.875 INCHES MINIMUM AND 2.125 INCHES MAXIMUM IN
DIAMETER0.056 INCHES MINIMUM AND 0.060 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B134 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-F-495 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY PKG DATA
STYLE DESIGNATORSTANDARD
SURFACE TREATMENTOXIDE OVERALL
MATERIALCOPPER ALLOY 260 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
NASM24665Interchangeable
interchangeable cross-reference
interchangeable
FFP386BANDTYPEAInterchangeable
interchangeable cross-reference
interchangeable
FFP386BTYPEAInterchangeable
interchangeable cross-reference
interchangeable
MS24665-325Interchangeable
interchangeable cross-reference
interchangeable
MS24665-180Interchangeable
interchangeable cross-reference
interchangeable
5315PL1390659Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFP386BANDTYPEA?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFP386BANDTYPEA?
FFP386BANDTYPEA is a PIN,COTTER.
What parts can replace FFP386BANDTYPEA?
There are 9 known substitutes for FFP386BANDTYPEA: NASM24665, FFP386BANDTYPEA, FFP386BTYPEA and 6 more. Substitute compatibility should be verified for your specific system.
Is FFP386BANDTYPEA still available?
FFP386BANDTYPEA is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFP386BANDTYPEA

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026