PartsTable
Technical Data Sheet
Download PDF

FFN836GPBTYPE3STYLE3 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

FFN836GPBTYPE3STYLE3: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OVERALL, nut_style: HEXAGON, nut_height: 0.294 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-262-5005, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFN836GPBTYPE3STYLE3
NSN: 5310-00-262-5005
NIINs: 002625005, 002660365, 005597540, 005761020, 006853427
FSC: 5310 — Nuts and Washers
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialCOPPER ALLOY 462 OR COPPER ALLOY 464 OR COPPER ALLOY 482 OR COPPER ALLOY 485 OVERALL
nut_styleHEXAGON
nut_height0.294 INCHES MINIMUM AND 0.330 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.606 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
nominal_thread_size0.375 INCHES IN
bearing_surface_typeCHAMFERED OR WASHER FACED
thread_quantity_per_inch16
nondefinitive_spec/std_dataB GROUP AND 3 TYPE AND 3 STYLE
NSN5310-00-262-5005
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FFN836GPBTYPE3STYLE3 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.788 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 6TH MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.500 INCHES IN
•
NONDEFINITIVE SPEC/STD DATA: B GROUP AND 3 TYPE AND 3 STYLE
•
NUT HEIGHT: 0.402 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.788 INCHES MINIMUM AND 0.812 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE OR ASTM A582 ASSN STD 2ND MATERIAL RESPONSE OR QQ-S-763 FED SPEC 3RD MATERIAL RESPONSE OR QQ-S-763 FED SPEC 4TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 5TH MATERIAL RESPONSE OR QQ-S-763 FED SPEC 6TH MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.500 INCHES IN
NONDEFINITIVE SPEC/STD DATAB GROUP AND 3 TYPE AND 3 STYLE
NUT HEIGHT0.402 INCHES MINIMUM AND 0.442 INCHES MAXIMUM IN
SURFACE TREATMENTPASSIVATE OVERALL
NUT STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES 1
FF-N-836EReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FFN836GPBTYPE3STYLE3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFN836GPBTYPE3STYLE3?
FFN836GPBTYPE3STYLE3 is a NUT,PLAIN,HEXAGON.
What parts can replace FFN836GPBTYPE3STYLE3?
There is 1 known substitute for FFN836GPBTYPE3STYLE3: FF-N-836E. Substitute compatibility should be verified for your specific system.
What is the NSN for FFN836GPBTYPE3STYLE3?
FFN836GPBTYPE3STYLE3 is cataloged in the U.S. Government catalog under NSN 5310-00-262-5005. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFN836GPBTYPE3STYLE3

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.