PartsTable
Technical Data Sheet
Download PDF

FFJ6010-4 — CAP,PROTECTIVE,DUST AND MOISTURE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FFJ6010-4: CAP,PROTECTIVE,DUST AND MOISTURE.

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include material: ALUMINUM ALLOY, design_type: FRICTION, overall_diameter: 0.215 INCHES NOMINAL IN, surface_treatment: ANODIZE, inside_diameter_length: 0.185 INCHES NOMINAL IN, round_cap_outside_surface_condition: SMOOTH. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-131-7105, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFJ6010-4
NSN: 5340-01-131-7105
FSC: 5340 — Hardware, Commercial
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
materialALUMINUM ALLOY
design_typeFRICTION
overall_diameter0.215 INCHES NOMINAL IN
surface_treatmentANODIZE
inside_diameter_length0.185 INCHES NOMINAL IN
round_cap_outside_surface_conditionSMOOTH
material_document_and_classificationQQ-A-225/8, T4 FED SPEC SINGLE MATERIAL RESPONSE
tube_outside_diameter_for_which_designed0.156 INCHES NOMINAL IN
NSN5340-01-131-7105
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFJ6010-4 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: FRICTION
•
OVERALL DIAMETER: 0.215 INCHES NOMINAL IN
•
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED: 0.156 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-225/8, T4 FED SPEC SINGLE MATERIAL RESPONSE
•
SURFACE TREATMENT: ANODIZE
•
MATERIAL: ALUMINUM ALLOY
•
INSIDE DIAMETER LENGTH: 0.185 INCHES NOMINAL IN
•
ROUND CAP OUTSIDE SURFACE CONDITION: SMOOTH
TECHNICAL CHARACTERISTICS
DESIGN TYPEFRICTION
OVERALL DIAMETER0.215 INCHES NOMINAL IN
TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED0.156 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8, T4 FED SPEC SINGLE MATERIAL RESPONSE
SURFACE TREATMENTANODIZE
MATERIALALUMINUM ALLOY
INSIDE DIAMETER LENGTH0.185 INCHES NOMINAL IN
ROUND CAP OUTSIDE SURFACE CONDITIONSMOOTH
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy FFJ6010-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFJ6010-4?
FFJ6010-4 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What is the NSN for FFJ6010-4?
FFJ6010-4 is cataloged in the U.S. Government catalog under NSN 5340-01-131-7105. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFJ6010-4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.