PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFH116TYPE2170
FFH116TYPE2170 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 3.000 INCHES NOMINAL IN, rising_pin: NOT INCLUDED, knuckle_type: FRICTION, pin_tip_style: OVAL HEAD, performance_type: MEDIUM DUTY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-209-7487, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFH116TYPE2170
NSN: 5340-00-209-7487
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width3.000 INCHES NOMINAL IN
rising_pinNOT INCLUDED
knuckle_typeFRICTION
pin_tip_styleOVAL HEAD
knuckle_quantity5
performance_typeMEDIUM DUTY
pin_removabilityREMOVABLE
style_designatorBUTT
material_thickness0.092 INCHES NOMINAL IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL MORTISE
NSN5340-00-209-7487
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFH116TYPE2170 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY WIDTH: 3.000 INCHES NOMINAL IN
•
MOUNTING HOLE QUANTITY: 6
•
PIN CENTER TO BODY EDGE DISTANCE: 1.500 INCHES NOMINAL IN
•
PIN TIP STYLE: OVAL HEAD
•
PERFORMANCE TYPE: MEDIUM DUTY
•
MOUNTING HOLE DIAMETER: 0.169 INCHES NOMINAL IN
•
RISING PIN: NOT INCLUDED
•
MATERIAL THICKNESS: 0.092 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
BODY WIDTH3.000 INCHES NOMINAL IN
MOUNTING HOLE QUANTITY6
PIN CENTER TO BODY EDGE DISTANCE1.500 INCHES NOMINAL IN
PIN TIP STYLEOVAL HEAD
PERFORMANCE TYPEMEDIUM DUTY
MOUNTING HOLE DIAMETER0.169 INCHES NOMINAL IN
RISING PINNOT INCLUDED
MATERIAL THICKNESS0.092 INCHES NOMINAL IN
KNUCKLE TYPEFRICTION
REVERSIBLE FEATURENOT INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
FFH116BAMEND2TYPE2027Upgraded Successor
successor cross-reference
successor
A156.1-A8112Upgraded Successor
successor cross-reference
successor
FFH116CTYPE2170Upgraded Successor
successor cross-reference
successor
MS27961-4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFH116TYPE2170?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFH116TYPE2170?
FFH116TYPE2170 is a HINGE,BUTT.
What parts can replace FFH116TYPE2170?
There are 4 known substitutes for FFH116TYPE2170: FFH116BAMEND2TYPE2027, A156.1-A8112, FFH116CTYPE2170 and 1 more. Substitute compatibility should be verified for your specific system.
Is FFH116TYPE2170 still available?
FFH116TYPE2170 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFH116TYPE2170

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026