PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFH111-1405
FFH111-1405 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The HASP,HINGED is a the manufacturer industrial component. Key specifications include specification/standard_data: 80204 - ANSI/BHMA A156., REV 2001.ANSI/BHMA A156., REV 2001 01/01/2001 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-546-2715, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFH111-1405
NSN: 5340-00-546-2715
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
specification/standard_data80204 - ANSI/BHMA A156., REV 2001.ANSI/BHMA A156., REV 2001 01/01/2001 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5340-00-546-2715
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFH111-1405 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SPECIFICATION/STANDARD DATA: 80204 - ANSI/BHMA A156., REV 2001.ANSI/BHMA A156., REV 2001 01/01/2001 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
SPECIFICATION/STANDARD DATA80204 - ANSI/BHMA A156., REV 2001.ANSI/BHMA A156., REV 2001 01/01/2001 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
N117-986Upgraded Successor
successor cross-reference
successor
FF-H-111Upgraded Successor
successor cross-reference
successor
A-A-462Upgraded Successor
successor cross-reference
successor
320432Upgraded Successor
successor cross-reference
successor
320441Upgraded Successor
successor cross-reference
successor
BHMA-A156.20 A83162 3-1/4INUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFH111-1405?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFH111-1405?
FFH111-1405 is a HASP,HINGED.
What parts can replace FFH111-1405?
There are 16 known substitutes for FFH111-1405: N117-986, FF-H-111, A-A-462 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFH111-1405?
FFH111-1405 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-546-2715. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFH111-1405

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026