PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFH00111TYPE1011
FFH00111TYPE1011 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,BARREL is a the manufacturer industrial component. Key specifications include width: 1.313 INCHES NOMINAL PLATE IN, length: 4.000 INCHES NOMINAL PLATE IN, diameter: 0.344 INCHES NOMINAL BAR IN, strike_type: RIM, special_features: WEIGHT:1.750 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:BRASS; LBS, features_provided: SCREW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2309, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFH00111TYPE1011
NSN: 5340-00-240-2309
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
width1.313 INCHES NOMINAL PLATE IN
length4.000 INCHES NOMINAL PLATE IN
diameter0.344 INCHES NOMINAL BAR IN
strike_typeRIM
strike_quantity1
special_featuresWEIGHT:1.750 LBS PER DOZEN;BAR O/A LG:2.500 IN.NOM;MATL:BRASS; LBS
features_providedSCREW
nondefinitive_spec/std_data1011 TYPE
departure_from_cited_documentCZFL,AAXW;AND WEIGHT:3.375 LBS PER DOZEN LBS
departure_from_cited_designatorCZFL,AAXE,ABVT;BAR O/A LG:2.500 IN.NOM;WEIGHT:1.750 LBS PER DOZEN LBS
NSN5340-00-240-2309
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFH00111TYPE1011 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FEATURES PROVIDED: SCREW
•
DEPARTURE FROM CITED DESIGNATOR: BAR O/A LG:2.000 IN.NOM IN
•
DIAMETER: 0.250 INCHES NOMINAL BAR IN
•
STRIKE TYPE: RIM
•
STRIKE QUANTITY: 1
•
LENGTH: 2.125 INCHES NOMINAL PLATE IN
•
NONDEFINITIVE SPEC/STD DATA: 1011 TYPE
TECHNICAL CHARACTERISTICS (FLIS)
FEATURES PROVIDEDSCREW
DEPARTURE FROM CITED DESIGNATORBAR O/A LG:2.000 IN.NOM IN
DIAMETER0.250 INCHES NOMINAL BAR IN
STRIKE TYPERIM
STRIKE QUANTITY1
LENGTH2.125 INCHES NOMINAL PLATE IN
NONDEFINITIVE SPEC/STD DATA1011 TYPE
SPECIAL FEATURESWEIGHT:1.250 LBS PER DOZEN;BAR O/A LG:2.000 IN.NOM;MATL:BRASS; LBS
WIDTH1.000 INCHES NOMINAL PLATE IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
BHMA-A156.16 L02032Interchangeable
interchangeable cross-reference
interchangeable
CD7071F8Interchangeable
interchangeable cross-reference
interchangeable
ANSI A156.16 P/N L02032Interchangeable
interchangeable cross-reference
interchangeable
ANSIA156.16L02142Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.16 L02142Interchangeable
interchangeable cross-reference
interchangeable
BHMA-A156.16Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFH00111TYPE1011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFH00111TYPE1011?
FFH00111TYPE1011 is a BOLT,BARREL.
What parts can replace FFH00111TYPE1011?
There are 24 known substitutes for FFH00111TYPE1011: BHMA-A156.16 L02032, CD7071F8, ANSI A156.16 P/N L02032 and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFH00111TYPE1011?
FFH00111TYPE1011 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2309. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFH00111TYPE1011

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026