PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFB171/05J01E2B
FFB171/05J01E2B ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The FFB171/05J01E2B is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-406-3653, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFB171/05J01E2B
NSN: 3110-00-406-3653
FSC: 3110
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
Part NumberFFB171/05J01E2B
NSN3110-00-406-3653
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FFB171/05J01E2B · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 12.00 MILLIMETERS NOMINAL MM
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: DOD-G-24508A NATIONAL SPEC SINGLE MATERIAL RESPONSE A
•
SURFACE FINISH: GROUND
•
SEAL QUANTITY: 2
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
BEARING SEAL TYPE: CONTACT
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER12.00 MILLIMETERS NOMINAL MM
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONDOD-G-24508A NATIONAL SPEC SINGLE MATERIAL RESPONSE A
SURFACE FINISHGROUND
SEAL QUANTITY2
STANDARD TOLERANCE DESIGNATIONABEC NO.1
LOAD DIRECTIONRADIAL
BEARING SEAL TYPECONTACT
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 33
610697Interchangeable
interchangeable cross-reference
interchangeable
900553Interchangeable
interchangeable cross-reference
interchangeable
25T819D7Interchangeable
interchangeable cross-reference
interchangeable
308KDDFS160Interchangeable
interchangeable cross-reference
interchangeable
308SFFB107A006A75C0000-0Interchangeable
interchangeable cross-reference
interchangeable
77608X1MILG3278AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFB171/05J01E2B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFB171/05J01E2B?
FFB171/05J01E2B is a FFB171/05J01E2B.
What parts can replace FFB171/05J01E2B?
There are 33 known substitutes for FFB171/05J01E2B: 610697, 900553, 25T819D7 and 30 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFB171/05J01E2B?
FFB171/05J01E2B is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-406-3653. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFB171/05J01E2B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026