PartsTable
Technical Data Sheet
Download PDF

FF90193-01 — CAP-PLUG,PROTECTIVE,DUST AND MOI

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FF90193-01: CAP-PLUG,PROTECTIVE,DUST AND MOI.

CAP-PLUG,PROTECTIVE,DUST AND MOI. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR GLASS, special_features: LENGTH IS 21.1 MM MM, end_item_identification: 2355-01-567-4930, closed_end_overall_diameter: 17.3 MILLIMETERS NOMINAL MM, part_name_assigned_by_controlling_agency: CAP,R-134A (LOW SIDE) A. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-611-9699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF90193-01
NSN: 5340-01-611-9699
FSC: 5340 — Hardware, Commercial
CAGE: 81118 — EATON CORPORATION (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR GLASS
special_featuresLENGTH IS 21.1 MM MM
end_item_identification2355-01-567-4930
closed_end_overall_diameter17.3 MILLIMETERS NOMINAL MM
part_name_assigned_by_controlling_agencyCAP,R-134A (LOW SIDE) A
NSN5340-01-611-9699
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FF90193-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CLOSED END OVERALL DIAMETER: 17.3 MILLIMETERS NOMINAL MM
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR GLASS
TECHNICAL CHARACTERISTICS
CLOSED END OVERALL DIAMETER17.3 MILLIMETERS NOMINAL MM
SPECIAL FEATURESLENGTH IS 21.1 MM MM
PART NAME ASSIGNED BY CONTROLLING AGENCYCAP,R-134A (LOW SIDE) A
END ITEM IDENTIFICATION2355-01-567-4930
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OR GLASS
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FF90193-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF90193-01?
FF90193-01 is a CAP-PLUG,PROTECTIVE,DUST AND MOI.
What is the NSN for FF90193-01?
FF90193-01 is cataloged in the U.S. Government catalog under NSN 5340-01-611-9699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF90193-01

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.