PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-W-92B TY A
FF-W-92B TY A ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL OR STEEL COMP 1095 OR STEEL COMP 1050 OR STEEL COMP 1040 OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, hole_diameter: 0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN, overall_diameter: 0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN, surface_treatment: CADMIUM OVERALL, peripheral_shape_style: ROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-055-2867, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-W-92B TY A
NSN: 5310-00-055-2867
FSC: 5310
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OR STEEL COMP 1095 OR STEEL COMP 1050 OR STEEL COMP 1040 OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
hole_diameter0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN
overall_diameter0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN
surface_treatmentCADMIUM OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
minimum_tensile_strength140000 POUNDS PER SQUARE INCH LBS
cross-sectional_shape_styleRECTANGULAR
material_document_and_classificationQQ-S-685-CANC FED SPEC 1ST MATERIAL RESPONSE AND AISI ASSN STD 2ND MATERIAL RESPONSE AND AISI ASSN STD 3RD MATERIAL RESPONSE AND AISI ASSN STD 4TH MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-055-2867
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FF-W-92B TY A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OR STEEL COMP 1095 OR STEEL COMP 1050 OR STEEL COMP 1040 OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-685-CANC FED SPEC 1ST MATERIAL RESPONSE AND AISI ASSN STD 2ND MATERIAL RESPONSE AND AISI ASSN STD 3RD MATERIAL RESPONSE AND AISI ASSN STD 4TH MATERIAL RESPONSE OVERALL
•
HOLE DIAMETER: 0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN
•
OVERALL DIAMETER: 0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN
•
MINIMUM TENSILE STRENGTH: 140000 POUNDS PER SQUARE INCH LBS
•
SURFACE TREATMENT: CADMIUM OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL OR STEEL COMP 1095 OR STEEL COMP 1050 OR STEEL COMP 1040 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-685-CANC FED SPEC 1ST MATERIAL RESPONSE AND AISI ASSN STD 2ND MATERIAL RESPONSE AND AISI ASSN STD 3RD MATERIAL RESPONSE AND AISI ASSN STD 4TH MATERIAL RESPONSE OVERALL
HOLE DIAMETER0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN
OVERALL DIAMETER0.958 INCHES MINIMUM AND 0.978 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH140000 POUNDS PER SQUARE INCH LBS
SURFACE TREATMENTCADMIUM OVERALL
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
AMS6350FInterchangeable
interchangeable cross-reference
interchangeable
MIL-S-18729CInterchangeable
interchangeable cross-reference
interchangeable
MIL-S-18729Interchangeable
interchangeable cross-reference
interchangeable
AN504Interchangeable
interchangeable cross-reference
interchangeable
114E5996-27Interchangeable
interchangeable cross-reference
interchangeable
AN3 THRU AN20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-W-92B TY A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-W-92B TY A?
FF-W-92B TY A is a WASHER,FLAT.
What parts can replace FF-W-92B TY A?
There are 10 known substitutes for FF-W-92B TY A: AMS6350F, MIL-S-18729C, MIL-S-18729 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-W-92B TY A?
FF-W-92B TY A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-055-2867. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-W-92B TY A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026