PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-S-92 TY I STY 10S
FF-S-92 TY I STY 10S ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.775 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN, screw_material: STEEL CORROSION RESISTING, fastener_length: 0.875 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-271-2067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-92 TY I STY 10S
NSN: 5305-00-271-2067
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class2A A
thread_length0.775 INCHES MINIMUM AND 0.875 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length0.875 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-271-2067
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FF-S-92 TY I STY 10S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE AND 10S STYLE
•
SCREW MATERIAL: STEEL CORROSION RESISTING
•
HEAD HEIGHT: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD STYLE: HEXAGON
•
WIDTH BETWEEN FLATS: 0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA1 TYPE AND 10S STYLE
SCREW MATERIALSTEEL CORROSION RESISTING
HEAD HEIGHT0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
THREAD DIRECTIONRIGHT-HAND
HEAD STYLEHEXAGON
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE
THREAD CLASS2A A
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH LBS
SCREW SURFACE TREATMENTPASSIVATE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
3-4APC7Interchangeable
interchangeable cross-reference
interchangeable
3-4WPC7Interchangeable
interchangeable cross-reference
interchangeable
118-32ALT2PC4Interchangeable
interchangeable cross-reference
interchangeable
FFS85TYPE1STYLE10SInterchangeable
interchangeable cross-reference
interchangeable
280451PC28Interchangeable
interchangeable cross-reference
interchangeable
T304Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-92 TY I STY 10S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-92 TY I STY 10S?
FF-S-92 TY I STY 10S is a SCREW,MACHINE.
What parts can replace FF-S-92 TY I STY 10S?
There are 14 known substitutes for FF-S-92 TY I STY 10S: 3-4APC7, 3-4WPC7, 118-32ALT2PC4 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-S-92 TY I STY 10S?
FF-S-92 TY I STY 10S is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-271-2067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-92 TY I STY 10S

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026