PartsTable
Technical Data Sheet
PartsTable / O-RING / FF-S-86 TY VI 3 /8X7/8INLGUNC3A

FF-S-86 TY VI 3 /8X7/8INLGUNC3A — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.637 INCHES NOMINAL IN, center_hole_diameter: 1.347 INCHES MINIMUM AND 1.371 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-166-1111, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-86 TY VI 3 /8X7/8INLGUNC3A
NSN: 5331-00-166-1111
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL
outside_diameter1.637 INCHES NOMINAL IN
center_hole_diameter1.347 INCHES MINIMUM AND 1.371 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-166-1111
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FF-S-86 TY VI 3 /8X7/8INLGUNC3A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.347 INCHES MINIMUM AND 1.371 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.637 INCHES NOMINAL IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS
TEMP RATING-20.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.347 INCHES MINIMUM AND 1.371 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.637 INCHES NOMINAL IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 26
AS3581-220InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
AC180-220InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ARP568-220MILG23652TYPE2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
8126699-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
9992-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
35360064InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-86 TY VI 3 /8X7/8INLGUNC3A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-86 TY VI 3 /8X7/8INLGUNC3A?
FF-S-86 TY VI 3 /8X7/8INLGUNC3A is a O-RING.
What parts can replace FF-S-86 TY VI 3 /8X7/8INLGUNC3A?
There are 26 known substitutes for FF-S-86 TY VI 3 /8X7/8INLGUNC3A: AS3581-220, AC180-220, ARP568-220MILG23652TYPE2 and 23 more. Substitute compatibility should be verified for your specific system.
Is FF-S-86 TY VI 3 /8X7/8INLGUNC3A still available?
FF-S-86 TY VI 3 /8X7/8INLGUNC3A is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-86 TY VI 3 /8X7/8INLGUNC3A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026