PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-S-325 GP2TY4CL1$$CL2
FF-S-325 GP2TY4CL1$$CL2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The FF-S-325 GP2TY4CL1$$CL2 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-995-0446, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-325 GP2TY4CL1$$CL2
NSN: 5340-00-995-0446
FSC: 5340
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
Part NumberFF-S-325 GP2TY4CL1$$CL2
NSN5340-00-995-0446
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FF-S-325 GP2TY4CL1$$CL2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: SINGLE EXPANSION MACHINE SCREW
•
THREAD PROVISION: THREADED
•
DEPARTURE FROM CITED DESIGNATOR: AS MOD BY 1/4 IN. DIA,1-3/4 IN. LG IN
•
HOLE ACCOMMODATION DIAMETER: 0.250 INCHES NOMINAL IN
•
UNIT QUANTITY: 1
•
INSERT TYPE FOR WHICH DESIGNED: BOLT
•
SAFE OPERATING LOAD RATING: 1350.0 POUNDS MINIMUM AND 1500.0 POUNDS MAXIMUM LBS
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSINGLE EXPANSION MACHINE SCREW
THREAD PROVISIONTHREADED
OVERALL LENGTH1.750 INCHES NOMINAL IN
DEPARTURE FROM CITED DESIGNATORAS MOD BY 1/4 IN. DIA,1-3/4 IN. LG IN
HOLE ACCOMMODATION DIAMETER0.250 INCHES NOMINAL IN
UNIT QUANTITY1
INSERT TYPE FOR WHICH DESIGNEDBOLT
SAFE OPERATING LOAD RATING1350.0 POUNDS MINIMUM AND 1500.0 POUNDS MAXIMUM LBS
FEATURES PROVIDEDCLOSED END
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FFS325Upgraded Successor
successor cross-reference
successor
PT6212DIAM0NDNYUpgraded Successor
successor cross-reference
successor
PT6312DIAM0NDNYUpgraded Successor
successor cross-reference
successor
FFS325GP4TYPE1Upgraded Successor
successor cross-reference
successor
PT6416DIAM0NDNYUpgraded Successor
successor cross-reference
successor
A-A-1923Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-325 GP2TY4CL1$$CL2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-325 GP2TY4CL1$$CL2?
FF-S-325 GP2TY4CL1$$CL2 is a FF-S-325 GP2TY4CL1$$CL2.
What parts can replace FF-S-325 GP2TY4CL1$$CL2?
There are 6 known substitutes for FF-S-325 GP2TY4CL1$$CL2: FFS325, PT6212DIAM0NDNY, PT6312DIAM0NDNY and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-S-325 GP2TY4CL1$$CL2?
FF-S-325 GP2TY4CL1$$CL2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-995-0446. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-325 GP2TY4CL1$$CL2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026