PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-S-210 TYPE 2 STYLE 1
FF-S-210 TYPE 2 STYLE 1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, head_style: HEADLESS (SETSCREW), point_style: FLAT, thread_class: 2A A, thread_length: 0.250 INCHES MAXIMUM IN, fastener_length: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-050-3882, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-210 TYPE 2 STYLE 1
NSN: 5305-00-050-3882
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
head_styleHEADLESS (SETSCREW)
point_styleFLAT
thread_class2A A
thread_length0.250 INCHES MAXIMUM IN
fastener_length0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.086 INCHES IN
thread_quantity_per_inch64
thread_series_designatorUNF
material_document_and_classificationQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5305-00-050-3882
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FF-S-210 TYPE 2 STYLE 1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
THREAD SERIES DESIGNATOR: UNF
•
MATERIAL: STEEL COMP 303 OVERALL
•
FASTENER LENGTH: 0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
THREAD QUANTITY PER INCH: 64
•
POINT STYLE: FLAT
TECHNICAL CHARACTERISTICS (FLIS)
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNF
MATERIALSTEEL COMP 303 OVERALL
FASTENER LENGTH0.240 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
THREAD QUANTITY PER INCH64
POINT STYLEFLAT
NOMINAL THREAD DIAMETER0.086 INCHES IN
THREAD CLASS2A A
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
503883Interchangeable
interchangeable cross-reference
interchangeable
D52LHA7438S62Interchangeable
interchangeable cross-reference
interchangeable
62411-632Interchangeable
interchangeable cross-reference
interchangeable
FF-S-210Interchangeable
Same NIIN cross-reference
interchangeable
FFS103TYPE2STYLE1Interchangeable
Same NIIN cross-reference
interchangeable
503882Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-210 TYPE 2 STYLE 1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-210 TYPE 2 STYLE 1?
FF-S-210 TYPE 2 STYLE 1 is a SETSCREW.
What parts can replace FF-S-210 TYPE 2 STYLE 1?
There are 6 known substitutes for FF-S-210 TYPE 2 STYLE 1: 503883, D52LHA7438S62, 62411-632 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-S-210 TYPE 2 STYLE 1?
FF-S-210 TYPE 2 STYLE 1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-050-3882. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-210 TYPE 2 STYLE 1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026