PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-S-200B
FF-S-200B ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEADLESS (SETSCREW), point_style: FLAT, spline_width: 0.010 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-3088, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-200B
NSN: 5305-00-022-3088
FSC: 5305
CAGE: 14153 — DEFENSE LOGISTICS AGENCY DBA DEFENSE SUPPLY CENTER PHILADELPHIA (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEADLESS (SETSCREW)
point_styleFLAT
spline_width0.010 INCHES MINIMUM AND 0.011 INCHES MAXIMUM IN
thread_class3A A
thread_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
fastener_length0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
locking_featurePATCH THREADS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE OVERALL
width_across_flats0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
NSN5305-00-022-3088
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FF-S-200B · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.438 INCHES MAXIMUM IN
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
•
INTERNAL DRIVE STYLE: HEXAGON
•
MATERIAL: STEEL OVERALL
•
FASTENER LENGTH: 0.438 INCHES NOMINAL IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD QUANTITY PER INCH: 16
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.438 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
INTERNAL DRIVE STYLEHEXAGON
MATERIALSTEEL OVERALL
FASTENER LENGTH0.438 INCHES NOMINAL IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD QUANTITY PER INCH16
THREAD DIRECTIONRIGHT-HAND
POINT STYLEHALF DOG
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
231249Interchangeable
interchangeable cross-reference
interchangeable
FF-S-200BInterchangeable
interchangeable cross-reference
interchangeable
FF-S-200B TYPE I STYLE 4Interchangeable
interchangeable cross-reference
interchangeable
AN565D10H6Interchangeable
interchangeable cross-reference
interchangeable
569-4700-1189569PCSP14Interchangeable
interchangeable cross-reference
interchangeable
525-4700-87303REV1PCS37Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-S-200B?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-200B?
FF-S-200B is a SETSCREW.
What parts can replace FF-S-200B?
There are 18 known substitutes for FF-S-200B: 231249, FF-S-200B, FF-S-200B TYPE I STYLE 4 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-S-200B?
FF-S-200B is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-022-3088. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-200B

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026