PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-P-101 TYEW
FF-P-101 TYEW ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PADLOCK is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, chain_length: 9.000 INCHES NOMINAL IN, construction: LAMINATED, overall_width: 1.500 INCHES NOMINAL IN, overall_height: 2.790 INCHES NOMINAL IN, shackle_diameter: 0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-682-1508, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-P-101 TYEW
NSN: 5340-00-682-1508
FSC: 5340
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
chain_length9.000 INCHES NOMINAL IN
constructionLAMINATED
overall_width1.500 INCHES NOMINAL IN
overall_height2.790 INCHES NOMINAL IN
shackle_diameter0.241 INCHES MINIMUM AND 0.321 INCHES MAXIMUM IN
shackle_clearance0.688 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
surface_treatmentLACQUER OVERALL
key_change_quantity5000
operating_mechanism_typePIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
nondefinitive_spec/std_dataMS35647-3 PART
material_document_and_classificationASTM B30 ASSN STD ALL MATERIAL RESPONSES OR ASTM B505 ASSN STD ALL MATERIAL RESPONSES OR ASTM B584 ASSN STD ALL MATERIAL RESPONSES OR ASTM B770 ASSN STD ALL MATERIAL RESPONSES OVERALL
NSN5340-00-682-1508
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FF-P-101 TYEW MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: LACQUER OVERALL
•
NONDEFINITIVE SPEC/STD DATA: MS35647-3 PART
•
MATERIAL: COPPER ALLOY OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B30 ASSN STD ALL MATERIAL RESPONSES OR ASTM B505 ASSN STD ALL MATERIAL RESPONSES OR ASTM B584 ASSN STD ALL MATERIAL RESPONSES OR ASTM B770 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
CONSTRUCTION: LAMINATED
•
CHAIN LENGTH: 9.000 INCHES NOMINAL IN
•
SHACKLE CLEARANCE: 0.688 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH1.500 INCHES NOMINAL IN
SURFACE TREATMENTLACQUER OVERALL
NONDEFINITIVE SPEC/STD DATAMS35647-3 PART
MATERIALCOPPER ALLOY OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B30 ASSN STD ALL MATERIAL RESPONSES OR ASTM B505 ASSN STD ALL MATERIAL RESPONSES OR ASTM B584 ASSN STD ALL MATERIAL RESPONSES OR ASTM B770 ASSN STD ALL MATERIAL RESPONSES OVERALL
CONSTRUCTIONLAMINATED
CHAIN LENGTH9.000 INCHES NOMINAL IN
SHACKLE CLEARANCE0.688 INCHES MINIMUM AND 1.188 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONSSBN MK-118 FIRE CONTROL SYSTEM; TRAILER, SEMI (M747) (HET); HELICOPTER,HH-53H PAVE LOW; AIRCRAFT (AC-130H, MC-130H, EC-130E, HC-130); 2330-01-274-7474 HEMAT TRAILER; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
OPERATING MECHANISM TYPEPIN TUMBLER WITH DEAD BOLT LOCKING CONSTRUCTION
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
A-A-59487Upgraded Successor
successor cross-reference
successor
A-A-59486Upgraded Successor
successor cross-reference
successor
A-A-59487-2SSUpgraded Successor
successor cross-reference
successor
AA59486-2AS06S0E2SUpgraded Successor
successor cross-reference
successor
AA59486-2AS05S0E2SUpgraded Successor
successor cross-reference
successor
AA59486-2AS04S0E2SUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-P-101 TYEW?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-P-101 TYEW?
FF-P-101 TYEW is a PADLOCK.
What parts can replace FF-P-101 TYEW?
There are 21 known substitutes for FF-P-101 TYEW: A-A-59487, A-A-59486, A-A-59487-2SS and 18 more. Substitute compatibility should be verified for your specific system.
Is FF-P-101 TYEW still available?
FF-P-101 TYEW is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-P-101 TYEW

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026