PartsTable
Technical Data Sheet
Download PDF

FF-H-116 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FF-H-116: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, body_width: 1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN, rising_pin: NOT INCLUDED, knuckle_type: FRICTION, pin_diameter: 0.131 INCHES NOMINAL IN, pin_tip_style: OVAL HEAD. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-224-7948, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-H-116
NSN: 5340-00-224-7948
NIINs: 002247948, 002294359, 002294361, 002294370, 002294372, 002294373, 002294374, 002400038, 002402579, 002402582, 002402583, 002402592, 002436191, 002436193, 002523326, 002823772, 002918236, 004323642, 005502553, 005986371, 006631477, 006641310, 006641311, 006641326, 006641328, 006641329, 006641339, 006646974, 009041290, 009634318, 011278824, 011788547, 011913451, 011934588
FSC: 5340 — Hardware, Commercial
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
body_width1.940 INCHES MINIMUM AND 2.060 INCHES MAXIMUM IN
rising_pinNOT INCLUDED
knuckle_typeFRICTION
pin_diameter0.131 INCHES NOMINAL IN
pin_tip_styleOVAL HEAD
coating_methodELECTROPLATED BODY
overall_length72.000 INCHES NOMINAL IN
door_leaf_width1.000 INCHES NOMINAL IN
jamb_leaf_width3.000 INCHES NOMINAL IN
knuckle_quantity5
performance_typeNOT RATED
NSN5340-00-224-7948
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FF-H-116 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE QUANTITY: 6
•
REVERSIBLE FEATURE: NOT INCLUDED
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
BODY WIDTH: 3.500 INCHES NOMINAL IN
•
PIN TIP STYLE: FLAT BUTTON
•
STYLE DESIGNATOR: BUTT
•
MOUNTING HOLE DIAMETER: 0.182 INCHES NOMINAL IN
•
PIN CENTER TO BODY EDGE DISTANCE: 1.750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
MOUNTING HOLE QUANTITY6
REVERSIBLE FEATURENOT INCLUDED
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
BODY WIDTH3.500 INCHES NOMINAL IN
PIN TIP STYLEFLAT BUTTON
STYLE DESIGNATORBUTT
MOUNTING HOLE DIAMETER0.182 INCHES NOMINAL IN
PIN CENTER TO BODY EDGE DISTANCE1.750 INCHES NOMINAL IN
HINGE MOUNTING TYPEFULL MORTISE
MATERIAL THICKNESS0.123 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
A8133Reference document
Same NSN cross-reference
Reference document — Secondary reference
ANSI A156.1 A8133Reference document
Same NSN cross-reference
Reference document — Secondary reference
BHMA-A156.1Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy FF-H-116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-H-116?
FF-H-116 is a HINGE,BUTT.
What parts can replace FF-H-116?
There are 3 known substitutes for FF-H-116: A8133, ANSI A156.1 A8133, BHMA-A156.1. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-H-116?
FF-H-116 is cataloged in the U.S. Government catalog under NSN 5340-00-224-7948. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-H-116

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.