FF-C-82 TY3STDSZB — CASTER,SWIVEL

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

FF-C-82 TY3STDSZB: CASTER,SWIVEL.

The CASTER,SWIVEL is a the manufacturer industrial component. Key specifications include material: STEEL BODY, stem_style: GRIPNECK, wheel_type: BUILT UP, stem_length: 1.438 INCHES NOMINAL IN, stem_diameter: 0.375 INCHES NOMINAL IN, wheel_diameter: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-081-3933, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

FF-C-82 TY3STDSZB

NSN: 5340-00-081-3933
FSC: 5340 — Hardware, Commercial
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)

SPECIFICATIONS

material	STEEL BODY
stem_style	GRIPNECK
wheel_type	BUILT UP
stem_length	1.438 INCHES NOMINAL IN
stem_diameter	0.375 INCHES NOMINAL IN
wheel_diameter	2.000 INCHES NOMINAL IN
wheel_quantity	1
style_designator	SWIVEL OFFSET
stem_socket_depth	1.500 INCHES NOMINAL IN
stem_socket_style	GRIPNECK-OPEN TYPE
surface_treatment	OXIDE COPPER BODY
wheel_bearing_type	PLAIN, SELF-LUBRICATED
NSN	5340-00-081-3933

COMPONENT DIAGRAM

KEY FEATURES

•

STEM DIAMETER: 0.375 INCHES NOMINAL IN

•

STEM LENGTH: 1.438 INCHES NOMINAL IN

•

WHEEL TYPE: BUILT UP

•

STEM SOCKET DIAMETER: 0.375 INCHES NOMINAL IN

•

STYLE DESIGNATOR: SWIVEL OFFSET

•

STEM STYLE: GRIPNECK

•

WHEEL QUANTITY: 1

•

STEM SOCKET STYLE: GRIPNECK-OPEN TYPE

TECHNICAL CHARACTERISTICS

STEM DIAMETER	0.375 INCHES NOMINAL IN
STEM LENGTH	1.438 INCHES NOMINAL IN
WHEEL TYPE	BUILT UP
STEM SOCKET DIAMETER	0.375 INCHES NOMINAL IN
STYLE DESIGNATOR	SWIVEL OFFSET
STEM STYLE	GRIPNECK
WHEEL QUANTITY	1
STEM SOCKET STYLE	GRIPNECK-OPEN TYPE
SPECIAL FEATURES	NONSTAINING, NONMARKING CUSHION TREADS, PERMANENTLY BONDED, IMPACT RESISTANT, HARD RUBBER COMPOSITION CORE; WHEELS TREAD THICKNESS 3/16IN.; WHEEL TREAD AND CORE MATERIAL HARDNESS RANGE HARD RUBBER 75-85 SHORE D, SOFT RUBBER 70-85 SHORE A; TENSILE 1500 PSI MIN., ADHESION BETWEEN TREAD AND CORE IS 50 LBS PER INCH OF WIDTH; AXLES AND STEMS - COLD DRAWN STEEL, NUT AND BOLT COMBINATION OR SOLID RIVET TYPE AND PERMANENTLY FASTENED; BALL BEARINGS - CORROSION RESISTANT, CASE HARDENED GROUND STEEL, ASSEMBLY WITH A WATER REPELLENT GREASE LBS
SURFACE TREATMENT	OXIDE COPPER BODY

SUBSTITUTES & CROSS-REFERENCES 3

A-A-1011Reference document

Same NSN cross-reference

Reference document — Secondary reference

C1024Reference document

Same NSN cross-reference

Reference document — Secondary reference

FF-C-82Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy FF-C-82 TY3STDSZB?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is FF-C-82 TY3STDSZB?

FF-C-82 TY3STDSZB is a CASTER,SWIVEL.

What parts can replace FF-C-82 TY3STDSZB?

There are 3 known substitutes for FF-C-82 TY3STDSZB: A-A-1011, C1024, FF-C-82. Substitute compatibility should be verified for your specific system.

What is the NSN for FF-C-82 TY3STDSZB?

FF-C-82 TY3STDSZB is cataloged in the U.S. Government catalog under NSN 5340-00-081-3933. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

FF-C-82 TY3STDSZB — CASTER,SWIVEL

Request a Quote — FF-C-82 TY3STDSZB