PartsTable
Technical Data Sheet

FF-B-171/36 — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

FF-B-171/36: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 80.00 MILLIMETERS NOMINAL MM, contact_angle: 25.0 DEGREES MAXIMUM, overall_width: 1.7500 INCHES NOMINAL IN, load_direction: ANGULAR. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-156-5431, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-B-171/36
NSN: 3110-00-156-5431
NIINs: 001565431, 001567924, 005404582, 005546149
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter80.00 MILLIMETERS NOMINAL MM
contact_angle25.0 DEGREES MAXIMUM
overall_width1.7500 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
shield_quantity2
special_featuresBEARING FURNISHED WITH RUST INHIBITOR /FOR STORAGE)
style_designatorLOADING GROOVE, NON-SEPARABLE
features_providedSNAP RING-GROOVE MOUNTING AND MOUNTING GROOVE
lubrication_materialGREASE
NSN3110-00-156-5431
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FF-B-171/36 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
LUBRICATION MATERIAL: GREASE
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
•
STYLE DESIGNATOR: LOADING GROOVE, NON-SEPARABLE
•
OVERALL OUTSIDE DIAMETER: 52.00 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
LUBRICATION MATERIALGREASE
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
SHIELD QUANTITY2
STYLE DESIGNATORLOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.8125 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER52.00 MILLIMETERS NOMINAL MM
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
SUBSTITUTES & CROSS-REFERENCES 7
FF-B-171/36J05D2XReference document
Same NSN cross-reference
Reference document — Secondary reference
700943Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-B-171B SUPP 1Reference document
Same NSN cross-reference
Reference document — Secondary reference
714194Reference document
Same NSN cross-reference
Reference document — Secondary reference
A-A-59640Reference document
Same NSN cross-reference
Reference document — Identification reference
5205FFM1SA2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FF-B-171/36?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-B-171/36?
FF-B-171/36 is a BEARING,BALL,ANNULAR.
What parts can replace FF-B-171/36?
There are 7 known substitutes for FF-B-171/36: FF-B-171/36J05D2X, 700943, FF-B-171B SUPP 1 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-B-171/36?
FF-B-171/36 is cataloged in the U.S. Government catalog under NSN 3110-00-156-5431. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-B-171/36