PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-B-171/33J07C2X
FF-B-171/33J07C2X ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The FF-B-171/33J07C2X is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-007-7094, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-B-171/33J07C2X
NSN: 3110-01-007-7094
FSC: 3110
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
Part NumberFF-B-171/33J07C2X
NSN3110-01-007-7094
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FF-B-171/33J07C2X · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 35.00 MILLIMETERS NOMINAL MM
•
LUBRICATION MATERIAL: GREASE
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: ANGULAR
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
SHIELD QUANTITY: 2
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER35.00 MILLIMETERS NOMINAL MM
OVERALL WIDTH1.3750 INCHES NOMINAL IN
LUBRICATION MATERIALGREASE
BORE SHAPESTRAIGHT
LOAD DIRECTIONANGULAR
RETAINER FABRICATION METHODPRESSED
SURFACE FINISHGROUND
SHIELD QUANTITY2
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
CONTACT ANGLE25.0 DEGREES MINIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
BS4-1575P19Interchangeable
interchangeable cross-reference
interchangeable
34-135-1Interchangeable
interchangeable cross-reference
interchangeable
5306Interchangeable
interchangeable cross-reference
interchangeable
5307Interchangeable
interchangeable cross-reference
interchangeable
SKF5307Interchangeable
interchangeable cross-reference
interchangeable
HR5069Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-B-171/33J07C2X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-B-171/33J07C2X?
FF-B-171/33J07C2X is a FF-B-171/33J07C2X.
What parts can replace FF-B-171/33J07C2X?
There are 30 known substitutes for FF-B-171/33J07C2X: BS4-1575P19, 34-135-1, 5306 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-B-171/33J07C2X?
FF-B-171/33J07C2X is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-007-7094. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-B-171/33J07C2X

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026