PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-B-171/09J00A3X

FF-B-171/09J00A3X — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL RETAINER, bore_shape: STRAIGHT, bore_diameter: 10.00 MILLIMETERS NOMINAL MM, overall_width: 0.5625 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-516-5182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-B-171/09J00A3X
NSN: 3110-00-516-5182
FSC: 3110
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL RETAINER
bore_shapeSTRAIGHT
bore_diameter10.00 MILLIMETERS NOMINAL MM
overall_width0.5625 INCHES NOMINAL IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
special_featuresW/O GREASE PLUG
bearing_seal_typeCONTACT
lubrication_materialGREASE
overall_outside_diameter30.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationLOOSE
NSN3110-00-516-5182
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FF-B-171/09J00A3X · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OUTER RING
•
INTERNAL FIT-UP DESIGNATION: LOOSE
•
BORE SHAPE: STRAIGHT
•
RETAINER FABRICATION METHOD: PRESSED
•
BEARING SEAL TYPE: CONTACT
•
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-25013 MIL SPEC SINGLE MATERIAL RESPONSE
•
LOAD DIRECTION: RADIAL
TECHNICAL CHARACTERISTICS
MATERIALSTEEL OUTER RING
INTERNAL FIT-UP DESIGNATIONLOOSE
BORE SHAPESTRAIGHT
RETAINER FABRICATION METHODPRESSED
BEARING SEAL TYPECONTACT
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-25013 MIL SPEC SINGLE MATERIAL RESPONSE
SPECIAL FEATURESW/O GREASE PLUG
LOAD DIRECTIONRADIAL
SEAL QUANTITY2
LUBRICATION MATERIALGREASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
21-630InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
FF-B-171/09J03B2AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A-A-59595InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
45C39InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
302M0114P001InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
A-A-59595-806JEBEInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-B-171/09J00A3X?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-B-171/09J00A3X?
FF-B-171/09J00A3X is a BEARING,BALL,ANNULAR.
What parts can replace FF-B-171/09J00A3X?
There are 30 known substitutes for FF-B-171/09J00A3X: 21-630, FF-B-171/09J03B2A, A-A-59595 and 27 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-B-171/09J00A3X?
FF-B-171/09J00A3X is cataloged in the Federal Logistics Information System under NSN 3110-00-516-5182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-B-171/09J00A3X

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026