PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-B-171/01-293
FF-B-171/01-293 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The FF-B-171/01-293 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-606-9576, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-B-171/01-293
NSN: 3110-00-606-9576
FSC: 3110
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
Part NumberFF-B-171/01-293
NSN3110-00-606-9576
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FF-B-171/01-293 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE WIDTH: 1.4375 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 58536-AA59649-293 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
•
CONE CORNER RADIUS: 0.1400 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
STYLE DESIGNATOR: NORMAL ANGLE
•
BORE DIAMETER: 1.7500 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESDUTY CLASS HM SERIES
CONE WIDTH1.4375 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA58536-AA59649-293 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
CONE CORNER RADIUS0.1400 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
STYLE DESIGNATORNORMAL ANGLE
BORE DIAMETER1.7500 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 35
RV619XGEF-M-ISOFLEXLDS18SPEZAInterchangeable
interchangeable cross-reference
interchangeable
AM36KDDFS160Interchangeable
interchangeable cross-reference
interchangeable
RV619XGEF-M-IS0FInterchangeable
interchangeable cross-reference
interchangeable
9038Interchangeable
interchangeable cross-reference
interchangeable
FF-B-171/1Interchangeable
interchangeable cross-reference
interchangeable
38ZInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-B-171/01-293?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-B-171/01-293?
FF-B-171/01-293 is a FF-B-171/01-293.
What parts can replace FF-B-171/01-293?
There are 35 known substitutes for FF-B-171/01-293: RV619XGEF-M-ISOFLEXLDS18SPEZA, AM36KDDFS160, RV619XGEF-M-IS0F and 32 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-B-171/01-293?
FF-B-171/01-293 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-606-9576. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-B-171/01-293

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026