PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FE94A
FE94A ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER AND GLUE AND GLYCERIN OVERALL, hole_diameter: 0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 3.188 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.062 INCHES NOMINAL IN, bolt_circle_diameter: 2.375 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-254-5625, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FE94A
NSN: 5330-00-254-5625
FSC: 5330
CAGE: 81240 — WHITE FARM EQUIPMENT CO SUB OF TIC INVESTMENT INC (USA)
SPECIFICATIONS
materialPAPER AND GLUE AND GLYCERIN OVERALL
hole_diameter0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
overall_width3.188 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.062 INCHES NOMINAL IN
bolt_hole_quantity2
bolt_circle_diameter2.375 INCHES NOMINAL IN
outside_corner_radius0.406 INCHES NOMINAL IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
side_radius_from_gasket_center0.938 INCHES NOMINAL IN
material_document_and_classificationHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
NSN5330-00-254-5625
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FE94A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.062 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: HH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
OUTSIDE CORNER RADIUS: 0.406 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
BOLT HOLE QUANTITY: 2
•
BOLT CIRCLE DIAMETER: 2.375 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
APERTURE DIAMETER1.062 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONHH-P-96 FED SPEC ALL MATERIAL RESPONSES OVERALL
OUTSIDE CORNER RADIUS0.406 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
BOLT HOLE QUANTITY2
BOLT CIRCLE DIAMETER2.375 INCHES NOMINAL IN
OVERALL WIDTH3.188 INCHES NOMINAL IN
HOLE DIAMETER0.406 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
STYLE DESIGNATORNON-CIRCULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
23402Interchangeable
interchangeable cross-reference
interchangeable
13814N PIECE 34Interchangeable
interchangeable cross-reference
interchangeable
13814NInterchangeable
interchangeable cross-reference
interchangeable
N23402Interchangeable
interchangeable cross-reference
interchangeable
SKZ5919Interchangeable
interchangeable cross-reference
interchangeable
234.02Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FE94A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FE94A?
FE94A is a GASKET.
What parts can replace FE94A?
There are 7 known substitutes for FE94A: 23402, 13814N PIECE 34, 13814N and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FE94A?
FE94A is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-254-5625. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FE94A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026