PartsTable
Technical Data Sheet
Download PDF

FDC7900PL-10-A-2 — SCREW ASSEMBLY,PANEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FDC7900PL-10-A-2: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 FASTENER, head_style: PAN, head_height: 0.113 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.350 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, thread_length: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-347-1085, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FDC7900PL-10-A-2
NSN: 5305-01-347-1085
FSC: 5305 — Screws
CAGE: 0HDW7 — HUCK INTERNATIONAL, INC. DIV HUCK PRODUCTS DIVISION (USA)
SPECIFICATIONS
materialIRON ALLOY 660 FASTENER
head_stylePAN
head_height0.113 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.350 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
thread_length0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
fastener_length0.395 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
minimum_tensile_strength160000 POUNDS PER SQUARE INCH LBS
NSN5305-01-347-1085
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FDC7900PL-10-A-2 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.113 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.395 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL ACCOMMODATED THICKNESS: 0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.113 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
FASTENER LENGTH0.395 INCHES MINIMUM AND 0.425 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL ACCOMMODATED THICKNESS0.031 INCHES MINIMUM AND 0.062 INCHES MAXIMUM IN
THREAD LENGTH0.235 INCHES MINIMUM AND 0.265 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A582 ASSN STD SINGLE MATERIAL RESPONSE STAND-OFF
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
CS1181P-3-A-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
03A249P3-A-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FT1301P-10-A-2Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FDC7900PL-10-A-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FDC7900PL-10-A-2?
FDC7900PL-10-A-2 is a SCREW ASSEMBLY,PANEL.
What parts can replace FDC7900PL-10-A-2?
There are 3 known substitutes for FDC7900PL-10-A-2: CS1181P-3-A-2, 03A249P3-A-2, FT1301P-10-A-2. Substitute compatibility should be verified for your specific system.
What is the NSN for FDC7900PL-10-A-2?
FDC7900PL-10-A-2 is cataloged in the U.S. Government catalog under NSN 5305-01-347-1085. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FDC7900PL-10-A-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.