PartsTable
Technical Data Sheet
Download PDF

FD75024-2 — CLAMP,LOOP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FD75024-2: CLAMP,LOOP.

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include diameter: 0.157 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN, material: COPPER ALLOY 172 BAND, overall_width: 6.000 INCHES NOMINAL IN, special_features: COLOR BLACK, style_designator: CENTER MOUNT, tongue_hole_type: ROUND, UNTHREADED. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-089-9345, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FD75024-2
NSN: 5340-01-089-9345
FSC: 5340 — Hardware, Commercial
CAGE: 1PQF4 — CAE USA INC. (USA)
SPECIFICATIONS
diameter0.157 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
materialCOPPER ALLOY 172 BAND
overall_width6.000 INCHES NOMINAL IN
special_featuresCOLOR BLACK
style_designatorCENTER MOUNT
tongue_hole_typeROUND, UNTHREADED
surface_treatmentOXIDE BAND
material_thickness0.016 INCHES NOMINAL IN
loop_inside_diameter1.438 INCHES NOMINAL IN
material_document_and_classificationQQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE BAND
distance_from_loop_center_to_tongue_end1.938 INCHES NOMINAL IN
center_to_center_distance_between_loop_and_mounting_hole1.031 INCHES NOMINAL IN
NSN5340-01-089-9345
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FD75024-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: CENTER MOUNT
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE BAND
•
DIAMETER: 0.157 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO TONGUE END: 1.938 INCHES NOMINAL IN
•
SURFACE TREATMENT: OXIDE BAND
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORCENTER MOUNT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 FED SPEC SINGLE MATERIAL RESPONSE BAND
DIAMETER0.157 INCHES MINIMUM AND 0.164 INCHES MAXIMUM IN
OVERALL WIDTH6.000 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END1.938 INCHES NOMINAL IN
SPECIAL FEATURESCOLOR BLACK
SURFACE TREATMENTOXIDE BAND
TONGUE HOLE TYPEROUND, UNTHREADED
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE1.031 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy FD75024-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FD75024-2?
FD75024-2 is a CLAMP,LOOP.
What is the NSN for FD75024-2?
FD75024-2 is cataloged in the U.S. Government catalog under NSN 5340-01-089-9345. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FD75024-2

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.