PartsTable
Technical Data Sheet
PartsTable / STORAGE_HDD / FD104
FD104 ✓ Verified by PartsTable
— · STORAGE_HDD · 3.5_SATA_HDD
WHAT YOU NEED TO KNOW
SAS backplane supports SATA, not vice versa NL-SAS = SAS protocol at nearline (7.2K) speed — NOT SATA
Gen8 LFF tray ≠ Gen10 tray — different screw holes
PRODUCT OVERVIEW

The ROTOR,IGNITION DISTRIBUTOR is a the manufacturer industrial component. Key specifications include width: 1.094 INCHES NOMINAL IN, height: 1.125 INCHES NOMINAL IN, length: 1.812 INCHES NOMINAL IN, drive_size: 3.50, design_type: FLEXIBLE DISK, unit_design: RACK MOUNTED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 1005-00-056-5842, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
STORAGE_HDD→ 3.5_SATA_HDD→ FD104
NSN: 1005-00-056-5842
FSC: 1005
CAGE: 05133 — XO TECHNOLOGIES INC (USA)
SPECIFICATIONS
width1.094 INCHES NOMINAL IN
height1.125 INCHES NOMINAL IN
length1.812 INCHES NOMINAL IN
drive_size3.50
design_typeFLEXIBLE DISK
unit_designRACK MOUNTED
power_sourceEXTERNAL
body_materialPLASTIC
drive_quantity1
mounting_methodSHAFT
contact_quantity1
special_features1.44 MB BLACK 3.5 IN. TEAC FLOPPY DRIVE. MB
NSN1005-00-056-5842
COMPONENT DIAGRAM
RELEASE LATCH — NL-SAS 7.2K FD104 OEM NL-SAS INTERFACE INTERPOSER SAS drive in SATA tray? Check board compatibility 3.5" (101.6 x 146mm) LFF 3.5" DRIVE | — | NL-SAS 7.2K NL-SAS uses SAS protocol at 7.2K RPM | SAS backplane supports SATA, not reverse Tray generation matters | Gen8 LFF tray differs from Gen10 TITLE LFF 3.5" DRIVE PN FD104 MFR OEM
KEY FEATURES
•
GENERAL CHARACTERISTICS ITEM DESCRIPTION: RECTANGULAR SHAPED, 4.660 IN.LG,3.150 IN.W,ONE CONNECTOR LOCATED IN FRONT, DEVICE HAS STEEL PLATE MTD TO BODY, 4 MTG HOLES 0.193 IN. OD IN
TECHNICAL CHARACTERISTICS (FLIS)
GENERAL CHARACTERISTICS ITEM DESCRIPTIONRECTANGULAR SHAPED, 4.660 IN.LG,3.150 IN.W,ONE CONNECTOR LOCATED IN FRONT, DEVICE HAS STEEL PLATE MTD TO BODY, 4 MTG HOLES 0.193 IN. OD IN
END ITEM IDENTIFICATIONF-4 PHANTOM AIRCRAFT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
FD104Interchangeable
interchangeable cross-reference
interchangeable
FA300Interchangeable
interchangeable cross-reference
interchangeable
DR-4Interchangeable
interchangeable cross-reference
interchangeable
SMS13Interchangeable
Same NIIN cross-reference
interchangeable
125C2661Interchangeable
Same NIIN cross-reference
interchangeable
AE154-001-99Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FD104?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FD104?
FD104 is a ROTOR,IGNITION DISTRIBUTOR. It is classified as a STORAGE_HDD (3.5_SATA_HDD).
What parts can replace FD104?
There are 6 known substitutes for FD104: FD104, FA300, DR-4 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FD104?
FD104 is cataloged in the Federal Logistics Information System (FLIS) under NSN 1005-00-056-5842. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FD104

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026