PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FD-N0001-002
FD-N0001-002 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The NUT,SELF-LOCKING,PLATE is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 OVERALL, nut_style: PLATE, nut_height: 0.132 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN, nut_length: 0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN, lubrication: DRY FILM LUBRICANT, plate_width: 0.251 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-849-9914, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FD-N0001-002
NSN: 5310-00-849-9914
FSC: 5310
CAGE: 33875 — RAYTHEON E-SYSTEMS, INC (USA)
SPECIFICATIONS
materialIRON ALLOY 660 OVERALL
nut_stylePLATE
nut_height0.132 INCHES MINIMUM AND 0.162 INCHES MAXIMUM IN
nut_length0.440 INCHES MINIMUM AND 0.470 INCHES MAXIMUM IN
lubricationDRY FILM LUBRICANT
plate_width0.251 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
temp_rating900.0 FAHRENHEIT NOMINAL DEGF
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
plate_thickness0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
NSN5310-00-849-9914
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FD-N0001-002 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
PLATE THICKNESS: 0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
DISTANCE FROM BASE TO CENTER OF APERTURE: 0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
•
MOUNTING HOLE DIAMETER: 0.066 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
•
THREAD QUANTITY PER INCH: 32
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: IRON ALLOY 660 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
PLATE THICKNESS0.010 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
DISTANCE FROM BASE TO CENTER OF APERTURE0.141 INCHES MINIMUM AND 0.171 INCHES MAXIMUM IN
MOUNTING HOLE DIAMETER0.066 INCHES MINIMUM AND 0.069 INCHES MAXIMUM IN
THREAD QUANTITY PER INCH32
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALIRON ALLOY 660 OVERALL
NOMINAL THREAD SIZE0.138 INCHES IN
SURFACE TREATMENTSILVER NUT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
11108-002Interchangeable
interchangeable cross-reference
interchangeable
10865-002Interchangeable
interchangeable cross-reference
interchangeable
NFM19032-50Interchangeable
interchangeable cross-reference
interchangeable
634504-2Interchangeable
Same NIIN cross-reference
interchangeable
MF6331-06Interchangeable
Same NIIN cross-reference
interchangeable
10105989-2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FD-N0001-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FD-N0001-002?
FD-N0001-002 is a NUT,SELF-LOCKING,PLATE.
What parts can replace FD-N0001-002?
There are 11 known substitutes for FD-N0001-002: 11108-002, 10865-002, NFM19032-50 and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FD-N0001-002?
FD-N0001-002 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-849-9914. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FD-N0001-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026