PartsTable
Technical Data Sheet
Download PDF

FCM2-A-14 — CLIP,SPRING TENSION

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

FCM2-A-14: CLIP,SPRING TENSION.

The CLIP,SPRING TENSION is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL IN, length: 2.625 INCHES NOMINAL IN, material: PLASTIC OVERALL, loop_radius: 0.156 INCHES NOMINAL IN, hole_diameter: 0.156 INCHES NOMINAL IN, overall_height: 5.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-195-3232, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FCM2-A-14
NSN: 5340-01-195-3232
NIINs: 011953232, 014258601
FSC: 5340 — Hardware, Commercial
CAGE: 06383 — PANDUIT CORP. (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL IN
length2.625 INCHES NOMINAL IN
materialPLASTIC OVERALL
loop_radius0.156 INCHES NOMINAL IN
hole_diameter0.156 INCHES NOMINAL IN
overall_height5.000 INCHES NOMINAL IN
mounting_methodADHESIVE
material_thickness0.187 INCHES NOMINAL IN
distance_from_end_to_hole_nearest_loop1.844 INCHES NOMINAL IN
NSN5340-01-195-3232
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FCM2-A-14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 2.625 INCHES NOMINAL IN
•
MOUNTING METHOD: ADHESIVE
•
DISTANCE FROM END TO HOLE NEAREST LOOP: 1.844 INCHES NOMINAL IN
•
LOOP RADIUS: 0.156 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.187 INCHES NOMINAL IN
•
WIDTH: 1.000 INCHES NOMINAL IN
•
MATERIAL: PLASTIC OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT5.000 INCHES NOMINAL IN
LENGTH2.625 INCHES NOMINAL IN
MOUNTING METHODADHESIVE
DISTANCE FROM END TO HOLE NEAREST LOOP1.844 INCHES NOMINAL IN
LOOP RADIUS0.156 INCHES NOMINAL IN
MATERIAL THICKNESS0.187 INCHES NOMINAL IN
WIDTH1.000 INCHES NOMINAL IN
MATERIALPLASTIC OVERALL
HOLE DIAMETER0.156 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
77C718176P7Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FCM2-A-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FCM2-A-14?
FCM2-A-14 is a CLIP,SPRING TENSION.
What parts can replace FCM2-A-14?
There is 1 known substitute for FCM2-A-14: 77C718176P7. Substitute compatibility should be verified for your specific system.
What is the NSN for FCM2-A-14?
FCM2-A-14 is cataloged in the U.S. Government catalog under NSN 5340-01-195-3232. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FCM2-A-14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.